IXDN409CI Ver la hoja de datos (PDF) - IXYS CORPORATION

Número de pieza

componentes Descripción

Fabricante

IXDN409CI

9 Amp Low-Side Ultrafast MOSFET Driver

IXYS CORPORATION 

Pin Configurations

IXDD409PI / 409SI / 409YI / 409CI IXDI409PI / 409SI / 409YI / 409CI

IXDN409PI / 409SI / 409YI / 409CI

1 VCC

2 IN

3 EN *

4 GND

VCC 8

OUT 7

OUT 6

GND 5

8 PIN DIP (PI)

SO8 (SI)

1

Vcc

2

OUT

3

GND

4

IN

5

EN *

TO220 (CI)

TO263 (YI)

Pin Description

SYMBOL

VCC

IN

EN *

FUNCTION

Supply Voltage

Input

Enable

OUT

Output

GND

Ground

DESCRIPTION

Positive power-supply voltage input. This pin provides power to the

entire chip. The range for this voltage is from 4.5V to 25V.

Input signal-TTL or CMOS compatible.

The system enable pin. This pin, when driven low, disables the chip,

forcing high impedance state to the output (IXDD409 Only).

Driver Output. For application purposes, this pin is connected,

through a resistor, to Gate of a MOSFET/IGBT.

The system ground pin. Internally connected to all circuitry, this pin

provides ground reference for the entire chip. This pin should be

connected to a low noise analog ground plane for optimum

performance.

* This pin is used only on the IXDD409, and is N/C on the IXDI409 and IXDN409.

Note 1: Operating the device beyond parameters with listed “absolute maximum ratings” may cause permanent

damage to the device. Typical values indicate conditions for which the device is intended to be functional, but do not

guarantee specific performance limits. The guaranteed specifications apply only for the test conditions listed.

Exposure to absolute maximum rated conditions for extended periods may affect device reliability.

CAUTION: These devices are sensitive to electrostatic discharge; follow proper ESD procedures

when handling and assembling this component.

Figure 2 - Characteristics Test Diagram

VIN

3

Share Link: