SFH4239 Ver la hoja de datos (PDF) - OSRAM GmbH

Número de pieza

componentes Descripción

Fabricante

SFH4239

High Power Infrared Emitter (940 nm)

OSRAM GmbH 

SFH 4239

Lötbedingungen

Soldering Conditions

Reflow Lötprofil für bleifreies Löten

Reflow Soldering Profile for lead free soldering

Vorbehandlung nach JEDEC Level 2

Preconditioning acc. to JEDEC Level 2

(nach J-STD-020C)

(acc. to J-STD-020C)

300

˚C

T 250

200

255 ˚C

240 ˚C

217 ˚C

150

100

Maximum Solder Profile

Recommended Solder Profile

Minimum Solder Profile

OHLA0687

260

˚C

+0 ˚C

-5 ˚C

245 ˚C ±5 ˚C

235

˚C

+5 ˚C

-0 ˚C

10 s min

30 s max

120 s max

Ramp Down

6 K/s (max)

100 s max

Ramp Up

50

3 K/s (max)

25 ˚C

0

0

50

100

150

200

Anm.: Das Gehäuse ist für Ultraschallreinigung nicht geeignet

Note: Package not suitable for ultra sonic cleaning

250

s 300

t

Published by

OSRAM Opto Semiconductors GmbH

Leibnizstraße 4, D-93055 Regensburg

www.osram-os.com

© All Rights Reserved.

The information describes the type of component and shall not

be considered as assured characteristics.

Terms of delivery and rights to change design reserved. Due to technical requirements components may contain

dangerous substances. For information on the types in question please contact our Sales Organization.

Packing

Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office.

By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing

material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs

incurred.

Components used in life-support devices or systems must be expressly authorized for such purpose! Critical

components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS.

1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected

to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system.

2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain

and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.

2010-05-18

8

Share Link: