SA10(C)-LFR Ver la hoja de datos (PDF) - Frontier Electronics.
Número de pieza
componentes Descripción
Fabricante
SA10(C)-LFR Datasheet PDF : 5 Pages
| |||
Frontier Electronics Corp.
667 E. COCHRAN STREET, SIMI VALLEY, CA 93065
TEL: (805) 522-9998 FAX: (805) 522-9989
E-mail: frontiersales@frontierusa.com
Web: http://www.frontierusa.com
500W TRANSIENT VOLTAGE SUPPRESSOR
SA5.0(C)-LFR THRU SA170(C)A-LFR
FEATURES
z PLASTIC PACKAGE HAS UNDERWRITERS LABORATORY
FLAMMABILITY CLASSIFICATION 94V-0
z 500W PEAK PULSE POWER CAPABILITY ON 10/1000μs
WAVEFORM
z EXCELLENT CLAMPING CAPABILITY
z REPETITION RATE (DUTY CYCLE):0.01%
z LOW INCREMENTAL SURGE RESISTANCE
z FAST RESPONSE TIME: TYPICALLY LESS THAN 1.0 ps FROM
0 VOLTS TO BV FOR UNIDIRECTIONAL AND 5.0ns FOR
BIDIRECTIONAL TYPES
z TYPICAL ID LESS THAN 1μA ABOVE 10V
z HIGH TEMPERATURE SOLDERING: 260°C /10S
/0.375” (9.5mm) LEAD LENGTH/5LBS., (2.3KG) TENSION
z ROHS
MECHANICAL DATA
z CASE: MOLDED PLASTIC, CASE:DO15, DIMENSIONS IN INCHES
AND (MILLIMETERS)
z TERMINALS: AXIAL LEADS, SOLDERABLE PER
MIL-STD-202, METHOD 2026
z POLARITY: COLOR BAND DENOTES POSITIVE END EXCEPT
BIDIRECTIONAL
z WEIGHT: 0.4 GRAMS
1.0(25.4)
MIN
.300(7.6)
.230(5.8)
1.0(25.4)
MIN
.034(0.9)
.028(0.7)
.140(3.6)
.104(2.6)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED
RATINGS
SYMBOL
VALUE
UNITS
PEAK PULSE POWER DISSIPATION ON 10/1000μS WAVEFORM
(NOTE 1, FIG. 1)
PPPM
MINIMUM 500
WATTS
PEAK PULSE CURRENT OF 0N 10/1000μS WAVEFORM
(NOTE 1, FIG. 3)
IPPM
SEE TABLE 1
A
STEADY STATE POWER DISSIPATION AT TL=75℃,
LEAD LENGTHS 0.375” (9.5mm) (NOTE2)
PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF
SINE-WAVE SUPERIMPOSED ON RATED LOAD,
UNIDIRECTIONAL ONLY(NOTE 3)
MAXIMUM INSTANTANEOUS FORWARD VOLTAGE AT 35.0A
FOR UNIDIRECTIONAL ONLY (NOTE 3)
OPERATING JUNCTION AND STORAGE TEMPERATURE RANGE
PM(AV)
IFSM
VF
TJ,TSTG
3.0
70
3.5
- 55 TO + 175
WATTS
A
V
℃
NOTE︰ 1. NON-REPETITIVE CURRENT PULSE, PER FIG.3 AND DERATED ABOVE TA=25°C PER FIG 2.
2. MOUNTED ON COPPER PAD AREA OF 1.6x1.6” (40×40mm) PER FIG. 5
3. 8.3ms SINGLE HALF SINE-WAVE OR EQUIVALENT SQUARE WAVE, DUTY CYCLE=4 PULSES PER MINUTE MAXIMUM.
4. FOR BIDIRECTIONAL USE C SUFFIX FOR 10% TOLERANCE, CA SUFFIX FOR 5% TOLERANCE
SA5.0(C)-LFR THRU SA170(C)A-LFR
Page: 1
Share Link: 