S102S12 Ver la hoja de datos (PDF) - Sharp Electronics

Número de pieza

componentes Descripción

Fabricante

S102S12

IT(rms)≤8A, Built-in snubber circuit Zero Cross type SIP 4pin Triac output SSR

Sharp Electronics 

S102S12 Series

S202S12 Series

∗Non-zero cross type is also available. (S102S11 Series/

S202S11 Series)

S102S12 Series

S202S12 Series

IT(rms)≤8A, Built-in snubber circuit

Zero Cross type

SIP 4pin

Triac output SSR

■ Description

S102S12 Series and S202S12 Series Solid State

Relays (SSR) are an integration of an infrared emitting

diode (IRED), a Phototriac Detector and a main output

Triac. These devices are ideally suited for controlling

high voltage AC loads with solid state reliability while

providing 4.0kV isolation (Viso(rms)) from input to

output.

■ Features

1. Output current, IT(rms)≤8.0A

2. Zero crossing functionary (VOX : MAX. 35V)

3. 4 pin SIP package

4. High repetitive peak off-state voltage

(VDRM : 600V, S202S12 Series)

(VDRM : 400V, S102S12 Series)

5. Built-in snubber circuit

6. High isolation voltage between input and output

(Viso(rms) : 4.0kV)

7. Lead-free terminal components are also available

(see Model Line-up section in this datasheet)

8. Screw hole for heat sink

■ Agency approvals/Compliance

1. Recognized by UL508, file No. E94758 (as models No.

S102S12/S202S12)

2. Approved by CSA 22.2 No.14, file No. LR63705 (as

models No. S102S12/S202S12)

3. Package resin : UL flammability grade (94V-0)

■ Applications

1. Isolated interface between high voltage AC devices

and lower voltage DC control circuitry.

2. Switching motors, fans, heaters, solenoids, and

valves.

3. Power control in applications such as lighting and

temperature control equipment.

Notice The content of data sheet is subject to change without prior notice.

In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP

devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.

Sheet No.:D4-A02901EN

1

Date Apr. 28. 2004

© SHARP Corporation

Share Link: