RT8284 Ver la hoja de datos (PDF) - Richtek Technology
Número de pieza
componentes Descripción
Fabricante
RT8284 Datasheet PDF : 15 Pages
| |||
RT8284
Parameter
Logic High
EN Threshold Voltage
Logic Low
Input Under Voltage Lockout Threshold
Input Under Voltage Lockout Hysteresis
Soft-Start Current
Soft-Start Period
Thermal Shutdown
Symbol
VIH
VIL
TSD
Test Conditions
VIN Rising
VSS = 0V
CSS = 0.1μF
Min Typ Max Unit
2.7
--
5.5
V
--
--
0.4
3.8 4.2 4.5
V
--
320
--
mV
--
6
--
μA
-- 15.5 --
ms
-- 150 --
°C
Note 1. Stresses listed as the above "Absolute Maximum Ratings" may cause permanent damage to the device. These are for
stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended
periods may remain possibility to affect device reliability.
Note 2. θJA is measured in natural convection at TA = 25°C on a high-effective thermal conductivity four-layer test board,refer
to JEDEC 51-7 thermal measurement standard. The measurement case position of θJC is on the exposeed pad for
SOP-8 (Exposed Pad) package.
Note 3. Devices are ESD sensitive. Handling precaution is recommended.
Note 4. The device is not guaranteed to function outside its operating conditions.
DS8284-01 March 2011
www.richtek.com
5
Share Link: 