RT8061A
Parameter
Symbol
Test Conditions
Over Temperature
Protection (latch-off)
TSD
Soft-Start Time
tSS
VOUT Discharge Resistance
VOUT Over Voltage
Protection (latch-off, delay
time = 10μs)
VOUT Under Voltage
Lockout Threshold
(latch-off)
Power Good
Measured FB, With Respect to VREF
Power Good Hysteresis
Min Typ Max Unit
-- 150 -- °C
500 --
--
μs
-- 100 --
Ω
115 120 130 %
57 66 75 %
85 90
--
%
--
5
--
%
Note 1. Stresses beyond those listed “Absolute Maximum Ratings” may cause permanent damage to the device. These are
stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in
the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions may
affect device reliability.
Note 2. θJA is measured at TA = 25°C on a high effective thermal conductivity four-layer test board per JEDEC 51-7. θJC is
measured at the exposed pad of the package.
Note 3. Devices are ESD sensitive. Handling precaution is recommended.
Note 4. The device is not guaranteed to function outside its operating conditions.
Copyright ©2012 Richtek Technology Corporation. All rights reserved.
www.richtek.com
4
is a registered trademark of Richtek Technology Corporation.
DS8061A-04 September 2012