IS61SP6464 Ver la hoja de datos (PDF) - Integrated Circuit Solution Inc
Número de pieza
componentes Descripción
Fabricante
IS61SP6464 Datasheet PDF : 20 Pages
| |||
IS61SP6464
TRUTH TABLE
OPERATION
ADDRESS
USED CE3 CE2 CE3 CE2 CE ADSP ADSC ADV WRITE OE CLK I/O
Deselected, Power-down
None X X X X H X L X X X L-H High-Z
Deselected, Power-down
None L X X X L L X X X X L-H High-Z
Deselected, Power-down
None X L X X L L X X X X L-H High-Z
Deselected, Power-down
None X X H X L L X X X X L-H High-Z
Deselected, Power-down
None X X X H L L X X X X L-H High-Z
Deselected, Power-down
None L X X X L H L X X X L-H High-Z
Deselected, Power-down
None X L X X L H L X X X L-H High-Z
Deselected, Power-down
None X X H X L H L X X X L-H High-Z
Deselected, Power-down
None X X X H L H L X X X L-H High-Z
Read Cycle, Begin Burst
External H H L
LL
L X X X L L-H Dout
Read Cycle, Begin Burst
External H H L
LL
L X X X H L-H High-Z
Write Cycle, Begin Burst
External H H L
LLHLXL
X L-H Din
Read Cycle, Begin Burst
External H H L
L L H L X H L L-H Dout
Read Cycle, Begin Burst
External H H L
L L H L X H H L-H High-Z
Read Cycle, Continue Burst Next X X X X X H H L H L L-H Dout
Read Cycle, Continue Burst Next X X X X X H H L H H L-H High-Z
Read Cycle, Continue Burst Next X X X X H X H L H L L-H Dout
Read Cycle, Continue Burst Next X X X X H X H L H H L-H High-Z
Write Cycle, Continue Burst Next X X X X X H H L L X L-H Din
Write Cycle, Continue Burst Next X X X X H X H L L X L-H Din
Read Cycle, Suspend Burst Current X X X X X H H H H L L-H Dout
Read Cycle, Suspend Burst Current X X X X X H H H H H L-H High-Z
Read Cycle, Suspend Burst Current X X X X H X H H H L L-H Dout
Read Cycle, Suspend Burst Current X X X X H X H H H H L-H High-Z
Write Cycle, Suspend Burst Current X X X X X H H H L X L-H Din
Write Cycle, Suspend Burst Current X X X X H X H H L X L-H Din
Notes:
1. All inputs except OE must meet setup and hold times for the Low-to-High transition of clock (CLK).
2. Wait states are inserted by suspending burst.
3. X means don't care. WRITE=L means any one or more byte write enable signals (BW1-BW8) and BWE are LOW or GW is
LOW. WRITE=H means all byte write enable signals are HIGH.
4. For a Write operation following a Read operation, OE must be HIGH before the input data required setup time and held HIGH
throughout the input data hold time.
5. ADSP LOW always initiates an internal READ at the Low-to-High edge of clock. A WRITE is performed by setting one or more
byte write enable signals and BWE LOW or GW LOW for the subsequent L-H edge of clock.
4
Integrated Circuit Solution Inc.
SSR009-0B
Share Link: 