HV583X Ver la hoja de datos (PDF) - Supertex Inc

Número de pieza

componentes Descripción

Fabricante

HV583X

128-Channel Serial to Parallel Converter with Push-Pull Outputs

Supertex Inc 

Ordering Information

Device

HV583

Recommended

Operating VPP Max

80V

Package Options

Die

HV583X

Absolute Maximum Ratings*

VPP, High voltage supply

VDD, Logic supply voltage

IOUT, Output source and sink current

IDIODE, Output body diode current

Logic input voltages

Tj, Junction temperature

-0.5V to +90V

-0.5V to +7.0V

-65mA to +40mA

-65mA to +65mA

-0.5V to VDD+0.5V

-25°C to +150°C

Storage temperature

-40°C to +150°C

*All voltages are referenced to device ground. Absolute maximum ratings are those values

which damage to the device may occur. Functional operation under these conditions is not

implied. Continous operation of the device at the absolute rating level may affect device

reliability.

HV583

Notes:

Power-up sequence should be the following:

1. Connect ground.

2. Apply VDD.

3. Set all inputs (Data, CLK, etc.) to a known state.

4. Apply VPP.

Power-down sequence should be the reverse of the above.

Operating Conditions

Symbol

VPP

VDD

IOUT

SR

fCLK

Parameter

High voltage supply

Low voltage supply

HVout peak output current

VPP power supply slew rate

Clock frequency

Tj

Operating junction temperature

Min Typ Max Units

Conditions

15

80

V Cload = 300pF

4.5 5.0

5.5

V

-30

30

mA

8.0 V/µs

40 MHz Data read

25 MHz Cascade connection

-25

+125 °C

Electrical Characteristics

DC Characteristics (Tj = 25°C, VDD = 5V, VPP = 80V)

Symbol

Parameter

Min Typ

IPPQ

IDDQ

HVOH

VPP quiescent supply current

VDD quiescent supply current

High level output voltage

73

76

10

HVOHD

HVOL

HVOLD

VIH

VIL

IIH

IIL

VOH

VOL

Output p-channel body diode

Low level output voltage

Output n-channel body diode

Logic input high voltage

Logic input low voltage

Logic input high current

Logic input low current

Logic output high

Logic output low

3.0

-1.5

2.0

0

10

30

-1.0

4.5V

2

Max

10

10

81.5

6.0

VDD

0.8

1.0

50

0.5V

Units

µA

µA

V

V

V

V

V

V

µA

µA

µA

V

V

Conditions

IOUT = 30mA, VPP = 80V

IOUT = 10mA, VPP = 20V

IOUT = -30mA, VPP =80V

IOUT = -30mA

IOUT = +30mA

VDD = 4.5V to 5.5V

VDD = 4.5V to 5.5V

VIH = 5.3V, VDD = 5.0V

VIH = 5.0V, For DIR only

VIL = -0.3V

IOUT = 1.0mA

IOUT = -1.0mA

Share Link: