PT2462 Ver la hoja de datos (PDF) - Princeton Technology

Número de pieza

componentes Descripción

Fabricante

PT2462

Remote Control Transmitter

Princeton Technology 

PT2462

CUSTOM CODE

The Custom Code consists of 8-bit, namely C0 ~ C7. Eight (8) Bits-- C0 ~ C7 are internally fixed by the mask ROM. Thus,

it is impossible to externally set these bits. Please refer to the diagram below.

C0 C1 C2 C3 C4 C5 C6 C7

However, PTC has made available two (2) Custom Code Options that may be externally selected by using the SEL

(Select) Pin. These options are enumerated below:

CUSTOM CODE OPTIONS

Option No. 1 (PT2462 Default Option)

There are two (2) Custom Code Selections that could be set internally. Using the SEL Pin, the two custom code choices

are either:

• Select SEL “H” or,

• Select SEL “L”

Please refer to the diagram below when SW Position 1 is ON.

Option No. 2 (Customer Option)

There is only one Custom Code Selection that could be set internally. In this case, the SEL Pin is not connected. Please

refer to the above figure when the SW position 2 is ON.

V1.6

7 of 13

Share Link: