PM9604 Ver la hoja de datos (PDF) - South African Micro Electronic Systems

Número de pieza

componentes Descripción

Fabricante

PM9604

THREE PHASE POWER/ENERGY METERING MODULE FOR SPI BUS AND PULSE OUTPUT DEVICES

South African Micro Electronic Systems 

PM9604/5AP

6. Jumper Configurations

The jumper configufations required for the two devices types are shown below:

JUMPER POSITION

JP1 1 - 2

JP2 1 - 2

JP3 1 - 2

JP4 1 - 2

2-3

3-4

JP5 1 - 2

2-3

JP6 1 - 2

2-3

JP7 1 - 2

SA9604A

Insert

Insert

Insert

Remove

Remove

Insert (SCK)

Remove

Insert (CS)

Remove

Insert (DI)

Remove

SA9605A

Insert

Insert

Insert

Insert (FOUT1)

Insert (FOUT2)

Remove

Insert (PGM1=1)

Remove (PGM1=0)

Insert (PGM0=1)

Remove (PGM0=0)

Insert

NOTES

Note 1

Note 2

Note 3

Note 3

Note 1:

Note 2:

Note 3:

The removal of the link on the current sensor input must only be

performed during calibration.

Only one of the two output pulse signals on the SA9605A may be

selected at any one time using this module. In a users application both

of these signals may be used.

The SA9605A I.C. has on-board pull-down resistors, pull-up connection

to VDD is, therefore, the only connection which must be catered for.

sames

5/14

Share Link: