PM5351-BI Ver la hoja de datos (PDF) - PMC-Sierra

Número de pieza

componentes Descripción

Fabricante

PM5351-BI

SATURN USER NETWORK INTERFACE (155-TETRA)

PMC-Sierra 

S/UNI-TETRA

DATASHEET

PMC-1971240

Issue

No.

6

Issue Date

December,

1999

ISSUE 7

PMC-Sierra, Inc.

PM5351 S/UNI-TETRA

SATURN USER NETWORK INTERFACE (155-TETRA)

Details of Change

General update including:

• Page 17 – Signal Detect connection information

• Page 18 – Power info when using 155.52 transmit clocks

• Page 24,32 – Clarification on use of TENB and RENB

• Page 37 – PHY_OEN operation when the TETRA is

shared with other PHY devices on the same bus

• Page 38 – Device initialization information

• Page 40 – 220nf X7R 10% ceramatic capacitor used to

meet jitter transfer specifications

• Page 42 – Pull-up resistor on QAVD signals needed to

avoid latchup during power-up

• Page 60, 214, 234 – Maximum packet length should be

set no greater than 0xFFFE

• Page 66 – Packets are not aborted in overrun conditions

• Page 72 – RPA assertion information

• Page 86 – Revision ID bits incremented

• Page 105 – LANB_WAN bit added to select between jitter

transfer and non jitter transfer mode of operations

• Page 152 – Path far end receiver failure alarm persistence

bit info updated

• Page 161 – Info on setting Path Signal Label for POS

mode

• Page 176 – FIFO reset should be performed after FIFO

overrrun

• Page 210 – Register bit added to select between abort

sequence or flag insertion under a drop path AIS condition

• Page 216 – Maximum Receive Packet Available High

Water Mark is 0xF0

PMC-Sierra, Inc.

105 - 8555 Baxter Place Burnaby, BC Canada V5A 4V7 604 .415.6000

Share Link: