PIC16F1824-I/SS Ver la hoja de datos (PDF) - Microchip Technology

Número de pieza

componentes Descripción

Fabricante

PIC16F1824-I/SS

28/40/44-Pin, Low-Power, High-Performance Microcontrollers with nanoWatt XLP Technology

Microchip Technology 

PIC16(L)F1824/1828

14/20-Pin Flash Microcontrollers with nanoWatt Technology

High-Performance RISC CPU:

• Only 49 Instructions to Learn:

- All single-cycle instructions except branches

• Operating Speed:

- DC – 32 MHz oscillator/clock input

- DC – 125 ns instruction cycle

• Up to 8 Kbytes Linear Program Memory

addressing

• Up to 256 bytes Linear Data Memory Addressing

• Interrupt Capability with Automatic Context

Saving

• 16-Level Deep Hardware Stack with Optional

Overflow/Underflow Reset

• Direct, Indirect and Relative Addressing modes:

- Two full 16-bit File Select Registers (FSRs)

- FSRs can read program and data memory

Flexible Oscillator Structure:

• Precision 32 MHz Internal Oscillator Block:

- Factory calibrated to ± 1%, typical

- Software selectable frequencies range of

31 kHz to 32 MHz

• 31 kHz Low-Power Internal Oscillator

• Four Crystal modes up to 32 MHz

• Three External Clock modes up to 32 MHz

• 4X Phase Lock Loop (PLL)

• Fail-Safe Clock Monitor:

- Allows for safe shutdown if peripheral clock

stops

• Two-Speed Oscillator Start-up

• Reference Clock module:

- Programmable clock output frequency and

duty-cycle

Special Microcontroller Features:

• 1.8V-5.5V operation – PIC16F1824/1828

• 1.8V-3.6V operation – PIC16LF1824/1828

• Self-Programmable under Software Control

• Power-on Reset (POR), Power-up Timer (PWRT)

and Oscillator Start-up Timer (OST)

• Programmable Brown-out Reset (BOR)

• Extended Watchdog Timer (WDT)

• In-Circuit Serial Programming™ (ICSP™) via

two pins

• In-Circuit Debug (ICD) via Two Pins

• Enhanced Low-Voltage Programming (LVP)

• Operating Voltage Range:

- 1.8V-5.5V (PIC16F1824/1828)

- 1.8V-3.6V (PIC16LF1824/1828)

• Programmable Code Protection

• Power-Saving Sleep mode

Extreme Low-Power Management

PIC16LF1824/1828 with nanoWatt XLP:

• Sleep mode: 20 nA

• Watchdog Timer: 500 nA

• Timer1 Oscillator: 600 nA @ 32 kHz

Analog Features:

• Analog-to-Digital Converter (ADC) module:

- 10-bit resolution, up to 12 channels

- Auto acquisition capability

- Conversion available during Sleep

• Analog Comparator module:

- Two rail-to-rail analog comparators

- Power mode control

- Software controllable hysteresis

• Voltage Reference module:

- Fixed Voltage Reference (FVR) with 1.024V,

2.048V and 4.096V output levels

- 5-bit rail-to-rail resistive DAC with positive

and negative reference selection

Peripheral Highlights:

• Up to 17 I/O Pins and 1 Input Only Pin:

- High current sink/source 25 mA/25 mA

- Programmable weak pull-ups

- Programmable interrupt-on-change pins

• Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler

• Enhanced Timer1:

- 16-bit timer/counter with prescaler

- External Gate Input mode

- Dedicated, low-power 32 kHz oscillator driver

• Three Timer2-types: 8-Bit Timer/Counter with 8-Bit

Period Register, Prescaler and Postscaler

• Two Capture, Compare, PWM (CCP) modules

• Two Enhanced CCP (ECCP) modules:

- Software selectable time bases

- Auto-shutdown and auto-restart

- PWM steering

• Master Synchronous Serial Port (MSSP) with SPI

and I2CTM with:

- 7-bit address masking

- SMBus/PMBusTM compatibility

• Enhanced Universal Synchronous Asynchronous

Receiver Transmitter (EUSART) module

• mTouch™ Sensing Oscillator module:

- Up to 12 input channels

• Data Signal Modulator module:

- Selectable modulator and carrier sources

 2010 Microchip Technology Inc.

Preliminary

DS41419B-page 3

Share Link: