PI6C10804
1.5V/1.8V/2.5V, 180MHz, 1:4 Networking Clock Buffer
Power Supply Characteristics
Parameters Description
Test Conditions(1)
IDDQ
Quiescent Power
Supply Current
VDD = 2.7V
VDD = 1.95V
VIN = GND or VDD
IDD_TOT
Total Power Supply
Current
VDD = 2.7V
VDD = 1.95V
All Outputs Toggling,
CL = 5pF, FIN = 125MHz
∆ICC
Static Supply Current VDD = 2.7V
per inputs @ High
Level
VDD = 1.95V
VINx = VDD - 0.6V (3)
VINx = VDD - 0.6V (3)
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics.
2. Typical values are at VDD = 1.8V or 2.5V, and +25°C ambient.
3. Per TTL driven input (VIN = VDD - 0.6V); all other inputs at VDD or GND.
Power Supply Characteristics
Parameters Description
Test Conditions(1)
IDDQ
Quiescent Power
Supply Current
VDD = 1.5V
VIN = GND or VDD
IDD_TOT
Total Power Supply
Current
VDD = 1.5V
All Outputs Toggling,
CL = 5pF, FIN = 125MHz
Notes:
1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics.
2. Typical values are at VDD = 1.2V or 1.5V, and +25°C ambient.
Min.
Typ. (2) Max.
10
10
20
15
200
200
Units
μA
mA
μA
Min.
Typ. (2) Max. Units
10 μA
15 mA
Capacitance (TA = 25°C, f = 1 MHz)
Parameters(1) Description
Test Conditions
Typ
CIN
Input Capacitance
VIN = 0V
2.0
COUT
Output Capacitance
VOUT = 0V
1.7
Note:
1.
This parameter is determined by device characterization but is not production tested.
Test Circuits for All Outputs
VDD
Max.
4
6
Units
pF
Pulse
Generator
f = 125MHz
50Ω
D.U.T.
33-Ohm
CL
5pF
Definitions:
CL = Load capacitance: includes jig and probe capacitance.
09-0056
5
PS8822G 10/07/09