PI5C3253 Ver la hoja de datos (PDF) - Pericom Semiconductor

Número de pieza

componentes Descripción

Fabricante

PI5C3253

Dual 4:1 Mux/DeMux Bus Switch

Pericom Semiconductor 

PI5C3253

Dual 4:1 Mux/DeMux Bus Switch

Maximum Ratings

(Above which the useful life may be impaired. For user guidelines, not tested.)

Storage Temperature ......................................................... –65°C to +150°C

Ambient Temperature with Power Applied ........................ –40°C to +85°C

Supply Voltage to Ground Potential (Inputs & VCC Only).. –0.5V to +7.0V

Supply Voltage to Ground Potential (Outputs & D/O Only) –0.5V to +7.0V

DC Input Voltage ................................................................. –0.5V to +7.0V

DC Output Current............................................................................ 120mA

Power Dissipation ................................................................................ 0.5W

Note:

Stresses greater than those listed under MAXIMUM

RATINGS may cause permanent damage to the

device. This is a stress rating only and functional operation

of the device at these or any other conditions above those

indicated in the operational sections of this specification is

not implied. Exposure to absolute maximum rating condi-

tions for extended periods may affect reliability.

DC Electrical Characteristics (Over the Operating Range, TA = –40°C to +85°C, VCC = 5V ±5%)

Parameters Description

Test Conditions(1)

Min.

VIH

Input HIGH Voltage

Guaranteed Logic HIGH Level

2.0

VIL

Input LOW Voltage

Guaranteed Logic LOW Level

–0.5

IIH

Input HIGH Current

VCC = Max., VIN = VCC

IIL

Input LOW Current

VCC = Max., VIN = GND

IOZH

High Impedance Output Current

0 ≤ IN, YN ≤ VCC

VIK

Clamp Diode Voltage

VCC = Min., IIN = –18mA

IOS

Short Circuit Current(3)

I (Y) = 0V, Y (I) = VCC

100

VH

Input Hysteresis at Control Pins

RON

Switch On-Resistance(4)

VCC = Min., VIN = 0.0V, ION = 48mA

VCC = Min., VIN = 2.4V, ION = 15mA

Typ.(2) Max. Units

V

0.8

±1

±1 µA

±1

–0.7 –1.2 V

mA

150

mV

5

7

Ω

10

15

Capacitance (TA = 25°C, f = 1 MHz)

Parameters(5)

Description

Test Conditions

Typ.

Max.

CIN

COFF

CON

Input Capacitance

IA/IB Capacitance, Switch Off

IA/IB Capacitance, Switch On

6

VIN = 0V

6

24

Notes:

1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.

2. Typical values are at VCC = 5.0V, TA = 25°C ambient and maximum loading.

3. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.

4. Measured by the voltage drop between I and Y pin at indicated current through the switch. ON resistance is determined by

the lower of the voltages on the two (I,Y) pins.

5. This parameter is determined by device characterization but is not production tested.

Units

pF

2

PS7017C

09/14/04

Share Link: