PI6C182 Ver la hoja de datos (PDF) - Pericom Semiconductor

Número de pieza

componentes Descripción

Fabricante

PI6C182

Precision 1-10 Clock Buffer

Pericom Semiconductor 

Output

Buffer

Test

Point

Test Load

3.3V

Clocking

2.4

Interface 1.5

(TTL) 0.4

tSDKH

tSDKP

tSDRISE

tSDKL

tSDFALL

PI6C182

Precision 1-10 Clock Buffer

Input

Waveform

1.5V

tplh

Output

Waveform

1.5V

1.5V

tphl

1.5V

Figure 1. Clock Waveforms

Minimum and Maximum Expected

Capacitive Loads

Clock Min. Max. Units

Notes

SDRAM 20

30

pF

SDRAM DIMM

Specificaion

Notes:

1. Maximum rise/fall times are guaranteed at maximum specified

load.

2. Minimum rise/fall times are guaranteed at minimum specified

load.

3. Rise/fall times are specified with pure capacitive load as shown.

Testing is done with an additional 500Ω resistor in parallel.

Design Guidelines to Reduce EMI

1. Place series resistors and CI capacitors as close as possible to

the respective clock pins. Typical value for CI is 10pF. Series

resistor value can be increased to reduce EMI provided that

the rise and fall time are still within the specified values.

2. Minimize the number of “vias” of the clock traces.

3. Route clock traces over a continuous ground plane or over

a continuous power plane. Avoid routing clock traces from

plane to plane (refer to rule #2).

4. Position clock signals away from signals that go to any cables

or any external connectors.

5

PS8165D

07/19/04

Share Link: