C9807_01 Ver la hoja de datos (PDF) - Peregrine Semiconductor Corp.

Número de pieza

componentes Descripción

Fabricante

C9807_01

SP6T UltraCMOS™ 2.75 V Switch 100 – 3000 MHz

Peregrine Semiconductor Corp. 

PE42660

Preliminary Specification

ESD Protection Circuit

Handset products must tolerate large ESD surges

at the antenna interface without damage. The IEC

61000-4-2 standard specifies both 8 kV contact

and 16 kV air discharges that typical handsets

must survive. By itself, the PE42660 offers

protection to 1.5 kV but with the addition of two

inexpensive passive components, the switch can

meet the levels as specified in the IEC spec.

Figure 10 is the suggested solution for compliance

with the IEC standards.

Figure 10. ESD Protection Circuit

ESD Protection

PE42660

L = 27 nH (muRata: LQG1127NJ00),

C = 33 pF (muRata: GRM33C0G330J50)

Table 8. PE42660 Antenna Application Test Results

(C=150 pF, R=330 Ω, IEC 61000-4-2 Standard)

Test Condition

Results

+8 kV contact discharge, 10 times with 1s intervals Pass

-8 kV contact discharge, 10 times with 1s intervals Pass

+16 kV air discharge, 10 times with 1s intervals Pass

-16 kV air discharge, 10 times with 1s intervals Pass

Table 9. Ordering Information

Order Code

42660-90

42660-99

42660-00

Die ID

C9807_01

C9807_01

C9807_01

Description

PE42660-DIE-D

PE42660-DIE-400G

PE42660-DIE-1H

Package

Film Frame

Waffle Pack

Evaluation Kit

Shipping Method

Wafer (Gross Die / Wafer Quantity)

400 Dice / Waffle Pack

1/ box

©2005 Peregrine Semiconductor Corp. All rights reserved.

Page 8 of 9

Document No. 70-0192-02 │ UltraCMOS™ RFIC Solutions

Share Link: