Philips Semiconductors
STN RGB - 160 output row driver
Preliminary specification
PCF8831
10 DC CHARACTERISTICS
(VDD − VSS) = 2.4 to 3.5 V; (VH − VL) = 15 to 55 V; Tamb = −40 to +85 °C; unless otherwise specified.
SYMBOL
PARAMETER
VL
LOW-level LCD driving
voltage
VH
HIGH-level LCD driving
voltage
VM
MID-level LCD driving
voltage
CONDITIONS
MIN.
−
TYP.
0
VL + 15.0 −
VSS
-V----L----+2-----V----H--
MAX.
−
UNIT
V
VL + 45.0 V
VDD
V
VMH
VSS
VDD
VIH
VIL
ILI
RO
IDD
IVH
IVMH
IVM
IVL
auxiliary supply voltage for
row switching
logic supply negative
voltage
logic supply positive voltage
HIGH-level input voltage all inputs; referred to VSS
LOW-level input voltage
all inputs; referred to VSS
input leakage current
row output on-state
resistance
current at pad VDD
current at pad VH
current at pad VMH
current at pad VM
current at pad VL
all inputs
VI = VDD
VI = VSS
notes 2 and 3
IO = +100 µA
IO = ±100 µA
IO = −100 µA
notes 3, 4 and 5
note 1
VM + 10
VM − 2.0 −
VSS + 2.4 −
VSS + 0.8 × −
(VDD − VSS)
VSS
−
−
−
−5
−
−
600
−
600
−
600
−
30
−
10
−
3
−
2
−
13
VL + 40
V
VM − 1.25 V
VSS + 3.5 V
VDD
V
VSS + 0.2 × V
(VDD − VSS)
5
µA
−
µA
tbf
Ω
tbf
Ω
tbf
Ω
tbf
µA
tbf
µA
tbf
µA
tbf
µA
tbf
µA
Notes
1. The minimum level of (VMH − VM) depends on (VM − VL); a lower level of (VM − VL) requires lower offset of VMH
referred to VM. A higher level of (VMH − VM) improves dynamic behaviour. A minimum level of
(VMH − VM) = 2.5 V + 0.2 × (VM − VL) should be maintained.
2. Row outputs tested one at a time.
3. (VH − VL) = 37 V; VMH = VH; (VDD − VSS) = 2.8 V; VM = -V----H----2-+----V-----L- ; (VM − VSS) = 1.47 V.
4. fRCLK = 19.2 kHz; SVM = 0; ROWRES1 = ROWRES2 = HIGH; single line mode; all row outputs open-circuit.
5. Frame inversion frequency fFI = 2---f--R×----C-1--L--6K---0-- .
2002 Aug 14
11