OPB963N51Z Ver la hoja de datos (PDF) - Optek Technology

Número de pieza

componentes Descripción

Fabricante

OPB963N51Z

Photologic® Slotted Optical Switch

Optek Technology 

Photologic® Slotted Optical Switch

OPB960, OPB970, OPB980, OPB990 Series

Absolute Maximum Ratings

Storage Temperature Range

Operating Temperature Range

Input Diode (E)

Input Diode Power Dissipation

Input Diode Forward D.C. Current, TA = 25°C

Input Diode Reverse D.C. Voltage, TA = 25°C

Sensor (S)

Supply Voltage (VCC to Ground)

Output Photologic® Power Dissipation

Voltage at Output Lead (Open-Collector Output), TA = 25°C

Short Circuit Output Current to Ground (IOS ) 1 sec Max.

Notes:

(11) Derate linearly 2.22 mW / °C above 25° C.

(12) Derate linearly 4.44 mW / °C above 25° C.

(13) Prior to 2004 Vcc was limited to 5.5V maximum.

(14) Do not connect input diode directly to a voltage source without an external current limiting resistor.

-40°C to +85° C

-40°C to +70° C

100 mW ( 11)

40 mA( 14)

2V

18 V ( 13)

200 mW ( 12)

35V

30 mA

Block Diagram

Buffer Totem-Pole

OPB960/ OPB970/ OPB980/ OPB990

Buffer Open-Collector

OPB961/ OPB971/ OPB981/ OPB991

Inverter Totem-Pole

OPB962/ OPB972/ OPB982/ OPB992

Inverter Open-Collector

OPB963/ OPB973/ OPB983/ OPB993

OPTEK reserves the right to make any changes at any time in order to improve design and to supply the best product possible.

Issue C.1 1/10

Page 4 of 6

OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006

Phone: (972) 323-2200 or (800) 341-4747

FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com

Share Link: