OPB720B Ver la hoja de datos (PDF) - Optek Technology
Número de pieza
componentes Descripción
Fabricante
OPB720B Datasheet PDF : 5 Pages
| |||
Long Distance Reflective Switch
OPB720A and OPB720B Series
Pin # Description
Red
White
VCC
Output
Black
Ground
DIMENSIONS ARE IN: [ MILLIMETERS]
INCHES
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Operating Temperature Range
OPB720A Series
OPB720B Series
Storage Temperature Range
Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)
Supply Voltage (VCC)
OPB720A Series
OPB720B Series
Maximum Collector Voltage
Collector DC Current (Sink)
Power Dissipation
0° C to + 50° C
0° C to + 70° C
-40° C to + 80° C
260° C(1)
10 to 30 Volts
4 to 7 Volts
30 V
50 mA
300 mW
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL
PARAMETER
MIN TYP MAX UNITS
TEST CONDITIONS
Low Level Output Voltage
VOL
OPB720A Series
OPB720B Series
-
-
- 0.8
- 0.8
V
VCC = 10 Volts, Note 4
VCC = 4 Volts, Note 4
High Level Output Voltage
VOH
OPB720A Series
OPB720B Series
5.0 -
-
3.5 -
-
V
VCC = 10 Volts, Note 5
VCC = 4 Volts, Note 5
Notes:
(1) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(2) Distance for OPB720A-06Z=6 “ (152 mm), Distance for OPB720A-12Z=12” (305mm), Distance for OPB720A-30VZ=30” (762 mm)
(3) OPB720A-30VZ & OPB720B-30VZ are class 1M laser safety device. Do Not look at the device closer than 4” (100 mm) with a
magnifying device.
(4) RL = 10 K, VCE = VCC Distance = See Note 2 & 3, (No Target)
(5) RL = 10 K, VCE = VCC, (90% Reflective Surface, Kodak—EK E152-7798)
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue F.1 01/08
Page 2 of 5
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Share Link: 