SPT7835 Ver la hoja de datos (PDF) - Signal Processing Technologies

Número de pieza

componentes Descripción

Fabricante

SPT7835

10-BIT, 5 MSPS, 75 mW A/D CONVERTER

Signal Processing Technologies 

DIGITAL OUTPUTS

OVERRANGE OUTPUT

The digital outputs (D0–D10) are driven by a separate

supply (OVDD) ranging from +3 V to +5 V. This feature

makes it possible to drive the SPT7835’s TTL/CMOS-

compatible outputs with the user’s logic system supply.

The format of the output data (D0–D9) is straight binary.

(See table III.) The outputs are latched on the rising edge

of CLK. These outputs can be switched into a tri-state

mode by bringing EN high.

Table III – Output Data Information

ANALOG INPUT OVERRANGE OUTPUT CODE

D10

D9–D0

+F.S. + 1/2 LSB

1

11 1111 1111

+F.S. –1/2 LSB

0

1 1 1 1 1 1 1 1 1Ø

+1/2 F.S.

0

ØØ ØØØØ ØØØØ

+1/2 LSB

0

00 0000 000Ø

0.0 V

0

00 0000 0000

(Ø indicates the flickering bit between logic 0 and 1.)

The OVERRANGE OUTPUT (D10) is an indication that

the analog input signal has exceeded the positive full-

scale input voltage by 1 LSB. When this condition occurs,

D10 will switch to logic 1. All other data outputs (D0 to D9)

will remain at logic 1 as long as D10 remains at logic 1.

This feature makes it possible to include the SPT7835 in

higher resolution systems.

EVALUATION BOARD

The EB7835 evaluation board is available to aid designers

in demonstrating the full performance of the SPT7835.

This board includes a reference circuit, clock driver circuit,

output data latches, and an on-board reconstruction of the

digital data. An application note describing the operation

of this board, as well as information on the testing of the

SPT7835, is also available. Contact the factory for price

and availability.

SPT

10

SPT7835

6/27/01

Share Link: