NTE30113 Ver la hoja de datos (PDF) - NTE Electronics
Número de pieza
componentes Descripción
Fabricante
NTE30113 Datasheet PDF : 2 Pages
| |||
Features:
D RoHS Compliant
D White Diffused
NTE30113
LED − Dual Color
5mm Yellow/Yellow Green
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Power Dissipation, Pd
Yellow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90mW
Yellow Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84mW
Continuous Forward Current, IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mW
Peak Forward Current (1/10 Duty Ratio, 0.1ms Pulse Width), IFM . . . . . . . . . . . . . . . . . . . . . . . 50mA
Reverse Voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3V
LED Junction Temperature, Tj . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +100°C
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −25°C to +80°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to +100°C
DIP Soldering Temperature (During Soldering, 3mm from body, 5sec max), TL . . . . . . . . . . +260°C
Electro−Optical Characteristics: (TA = +25°C unless otherwise specified)
Parameter
Symbol Test Conditions Min Typ Max Unit
View Angle of Half Power
2Q 1/2 IF = 20mA
− 45 − deg
Forward Voltage
Yellow
VF IF = 20mA
− 2.10 2.80 V
Yellow Green
− 2.15 2.80 V
Luminous Intensity (Note 1)
Yellow
IV IF = 20mA
− 35 − mcd
Yellow Green
− 50 − mcd
Peak Emission Wavelength
Yellow
λp IF = 20mA
− 589 − nm
Yellow Green
− 570 − nm
Dominate Wave Length (Note 2)
Yellow
λd(HUE) IF = 20mA
− 585 − nm
Yellow Green
− 567 − nm
Note 1. Luminous intensity is measured with an Exeltron 2001, Tolerance = 30%.
Note 2. The dominate wavelength, λd, is derived from the CIE Chromaticity Diagram and represents
the color of the device.
Share Link: 