NJU3712 Ver la hoja de datos (PDF) - Japan Radio Corporation
Número de pieza
componentes Descripción
Fabricante
NJU3712 Datasheet PDF : 8 Pages
| |||
NJU3575152
ABSOLUTE MAXIMUM RATINGS
(Ta=25C)
PARAMETER
SYMBOL
RATINGS
UNIT
Supply Voltage Range
VDD
-0.5 ~ +7.0
V
Input Voltage Range
VI
VSS-0.5 ~ VDD+0.5
V
Output Voltage Range
VO
VSS-0.5 ~ VDD+0.5
V
Output Current
IO
±25
mA
Output Short Current
VO=7V, VI=0V
10 (max)
(SO Terminal)
IOS
mA
(Note 5)
VO=0V, VI=7V
-10 (max)
Output Short Current
VO=7V, VI=0V
20 (max)
(P1~P8 Terminals)
IOSD
mA
(Note 5)
VO=0V, VI=7V
-20 (max)
Power Dissipation
PD
700 (DIP)
300 (DMP)
mW
Operating Temperature Range
Topr
-25 ~ +85
C
Storage Temperature Range
Tstg
-65 ~+150
C
Note 2) All voltage are relative to VSS=0V reference.
Note 3) Do not exceed the absolute maximum ratings, otherwise the stress may cause a permanent damage to the IC. It is also
recommended that the IC be used in the range specified in the DC electrical characteristics, or the electrical stress may cause
malfunctions and impact on the reliability.
Note 4) To stabilize the IC operation, place decoupling capacitor between VDD and VSS.
Note 5) VDD=7V, VSS=0V, less than 1 second per pin.
DC ELECTRICAL CHARACTERISTICS
PARAMETER
SYMBOL
(VDD=4.5~5.5V, VSS=0V, Ta=25C, unless otherwise noted)
CONDITION
MIN
TYP
MAX UNIT
Operating Voltage
VDD
4.5
-
5.5
V
Operating Current
IDDS
VIH=VDD, VIL=VSS
-
-
0.1
mA
High-level Output Voltage
Low-level Output Voltage
VOH IOH=-0.4mA
VOL
IOL=+3.2mA
SO
4.0
-
VDD
V
Terminal
VSS
-
0.4
V
High-level Input Voltage
VIH
0.7VDD
-
VDD
V
Low-level Input Voltage
VIL
VSS
-
0.3VDD
V
Input Leakage Current
ILI
VI=0~VDD
-10
-
10
µA
IOH=-25mA
VDD-1.5
-
High-level Output Voltage
(Note 6)
VOHD
VDD=5V IOH=-15mA
P1~P8
Terminals
VDD-1.0
-
IOH=-10mA
VDD-0.5
-
VDD
VDD
V
VDD
IOL=+25mA
VSS
-
1.5
Low-level Output Voltage
(Note 6)
VOLD
VDD=5V
IOL=+15mA
P1~P8
Terminals
VSS
-
0.8
V
IOL=+10mA
VSS
-
0.4
Note 6) Specified value represent output current per pin. When use, total current consideration and less than power dissipation in rating
operation should be required.
Ver.2017-12-07
-5-
Share Link: 