NJG1106KB2 Ver la hoja de datos (PDF) - Japan Radio Corporation

Número de pieza

componentes Descripción

Fabricante

NJG1106KB2

800MHz BAND LNA GaAs MMIC

Japan Radio Corporation  

NJG1106KB2

nTERMINAL INFORMATION

Pin Function

Description

RF output and voltage supply pin. External matching circuits and a bypass

1 RFout

capacitor is required. L4 is a RF choke inductor and C1 is a DC blocking

capacitor. These elements are used as output matching circuit. C2 is a bypass

capacitor. (Please refer to “RECOMMENDED CIRCUIT”)

2,4,5 GND

Ground pin. To keep good RF grounding performance, please use multiple via

holes to connect with ground plane and this pin.

3

EXTCAP

An external bypass capacitor is required. (Please refer to “RECOMMENDED

CIRCUIT”)

6 RFin

RF input pin. A DC blocking capacitor is not required. An external matching circuit

is required. (Please refer to “RECOMMENDED CIRCUIT”)

-3-

Share Link: