NCP382HD15AAR2G(2012) Ver la hoja de datos (PDF) - ON Semiconductor
Número de pieza
componentes Descripción
Fabricante
NCP382HD15AAR2G Datasheet PDF : 12 Pages
| |||
NCP382
Fixed Current-Limiting
Power-Distribution
Switches
The NCP382 is a single input dual outputs high side
power−distribution switch designed for applications where heavy
capacitive loads and short−circuits are likely to be encountered. The
device includes an integrated 80 mW, P−channel MOSFET. The
device limits the output current to a desired level by switching into a
constant−current mode when the output load exceeds the current−limit
threshold or a short is present. The current−limit threshold is internally
fixed. The power−switches rise and fall times are controlled to
minimize current ringing during switching.
The FLAG logic output asserts low during overcurrent or
overtemperature conditions. The switch is controlled by a logic enable
input active high or low.
Features
• 2.5 V – 5.5 V Operating Range
• 80 mW High−Side MOSFET
• Current Limit: Fixed 500 mA, 1 A, 1.5 A and 2 A
• Undervoltage Lock−Out (UVLO)
• Soft−Start Prevents Inrush Current
• Thermal Protection
• Soft Turn−Off
• Enable Active High or Low (EN or EN)
• Compliance to IEC61000−4−2 (Level 4)
♦ 8.0 kV (Contact)
♦ 15 kV (Air)
• UL Listed − File No. E343275
• IEC60950 − Edition 2 − Amendment 1 Certified (CB Scheme)
• These are Pb−Free Devices
Typical Applications
• Laptops
• USB Ports/Hubs
• TVs
http://onsemi.com
1
DFN8 3x3
CASE 506BW
MARKING
DIAGRAMS
1 XXXXX
XXXXX
ALYWG
G
8
1
SOIC−8 NB
CASE 751
8
XXXXXX
ALYWX
G
1
XXXXX = Specific Device Code
A
= Assembly Location
L
= Wafer Lot
Y
= Year
W
= Work Week
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 10 of this data sheet.
© Semiconductor Components Industries, LLC, 2012
1
February, 2012 − Rev. 8
Publication Order Number:
NCP382/D
Share Link: 