NCP348 Ver la hoja de datos (PDF) - ON Semiconductor

Número de pieza

componentes Descripción

Fabricante

NCP348

Positive Overvoltage Protection Controller with Internal Low RON NMOS FET and Status FLAG

ON Semiconductor 

NCP348, NCP348AE

CONDITIONS

IN

OUT

VIN > OVLO

0 < VIN < UVLO

And/Or

VOLTAGE DETECTION

/EN = 1

Figure 16. Simplified Diagram

CONDITIONS

IN

OUT

/EN = 0

&

VOLTAGE DETECTION

UVLO < VIN < OVLO

Figure 17. Simplified Diagram

Operation

The NCP348 provides overvoltage protection for

positive voltage, up to 28 V. A Low RDS(on) NMOS FET

protects the systems (i.e.: charger) connected on the Vout

pin, against positive overvoltage. At powerup, with EN pin

= low, the output is rising up 50 ms after the input

overtaking undervoltage UVLO (Figure 3). The NCP348

provides a FLAG output, which alerts the system that a fault

has occurred. A 50 ms additional delay, regarding

available output (Figure 3) is added between output signal

rising up and to FLAG signal rising up. FLAG pin is an open

drain output.

http://onsemi.com

8

Share Link: