lect command through the command register without re-
quiring VID, as shown in table4.
To verify whether or not sector being protected, the sec-
tor address must appear on the appropriate highest or-
der address bit (see Table 1 and Table 2). The rest of
address bits, as shown in table3, are don't care. Once
all necessary bits have been set as required, the pro-
gramming equipment may read the corresponding iden-
tifier code on Q7~Q0.
MX29LV081B
TABLE 2. MX29LV081B AUTO SELECT MODE OPERATION
A19 A12 A9 A8 A6 A5 A1 A0
Description
CE OE WE | |
|
|
Q7~Q0
A13 A10
A7
A2
Read Manufacturer Code L L H X X VID X L X L L
C2H
Silicon Device ID
L L H X X VID X L X L H
38H
ID
01H
Sector Protection
Verification
L L H SA X VID X L X H L (protected)
00H
(unprotected)
NOTE:SA=Sector Address, X=Don't Care, L=Logic Low, H=Logic High
P/N:PM1115
REV. 1.1, DEC. 20, 2004
6