MX29F400CTTI-55 Ver la hoja de datos (PDF) - Macronix International
Número de pieza
componentes Descripción
Fabricante
MX29F400CTTI-55
Macronix International
MX29F400CTTI-55 Datasheet PDF : 42 Pages
| |||
MX29F400C T/B
COMMAND DEFINITIONS
Device operations are selected by writing specific address
and data sequences into the command register. Writing
incorrect address and data values or writing them in the
improper sequence will reset the device to the read mode.
Table 1 defines the valid register command sequences.
Note that the Erase Suspend (B0H) and Erase Resume
(30H) commands are valid only while the Sector Erase
operation is in progress. Either of the two reset com-
mand sequences will reset the device(when applicable).
TABLE 2. MX29F400C T/B BUS OPERATION
Pins
CE# OE# WE# A0 A1 A6 A9 Q0 ~ Q15
Mode
Read Silicon ID
Manufacture Code(1)
L
L
H
L
L
X
VID(2) C2H (Byte mode)
00C2H (Word mode)
Read Silicon ID
Device Code(1)
L
L
H
H
L
X
VID(2) 23H/ABH (Byte mode)
2223H/22ABH (Word mode)
Read
Standby
L
L H A0 A1 A6 A9 D
OUT
H
XXXXXX
HIGH Z
Output Disable
L
HHXXXX
HIGH Z
Write
L
H
L
A0 A1 A6 A9
DIN(3)
Sector Protect without 12V
L
HL
X
X
L
H
X
system (6)
Chip Unprotect without 12V L
HL XXHH
X
system (6)
Verify Sector Protect/Unprotect L
L HXHXH
Code(5)
without 12V system (7)
Reset
X
XXXXXX
HIGH Z
NOTES:
1. Manufacturer and device codes may also be accessed via a command register write sequence. Refer to Table 1.
2. VID is the Silicon-ID-Read high voltage, 11.5V to 12.5V.
3. Refer to Table 1 for valid Data-In during a write operation.
4. X can be VIL or VIH.
5. Code=00H/XX00H means unprotected.
Code=01H/XX01H means protected.
A17~A12=Sector address for sector protect.
6. Refer to sector protect/unprotect algorithm and waveform.
Must issue "unlock for sector protect/unprotect" command before "sector protect/unprotect without 12V system"
command.
7. The "verify sector protect/unprotect without 12V system" is only following "Sector protect/unprotect without 12V
system" command.
P/N:PM1200
REV. 1.0, DEC. 20, 2005
7
Share Link: