MSP10A05681/102G Ver la hoja de datos (PDF) - Vishay Semiconductors

Número de pieza

componentes Descripción

Fabricante

MSP10A05681/102G

Thick Film Resistor Networks, Single-In-Line, Molded SIP

Vishay Semiconductors 

www.vishay.com

MSP

Vishay Dale

“A” PROFILE +70 °C PACKAGE RATINGS

MSP10A

1.25 W

MSP09A

1.12 W

MSP08A

1.00 W

MSP06A

0.75 W

“C” PROFILE +70 °C PACKAGE RATINGS

MSP10C

1.60 W

MSP08C

1.30 W

MSP06C

1.00 W

Note

• Higher power ratings available. Contact factory.

PERFORMANCE

TEST

Power Conditioning

Thermal Shock

Short Time Overload

Low Temperature Operation

Moisture Resistance

Resistance to Soldering Heat

Shock

Vibration

Load Life

Terminal Strength

Insulation Resistance

Dielectric Withstanding Voltage

CONDITIONS

1.5 x rated power, applied 1.5 h “ON” and 0.5 h “OFF”

for 100 h ± 4 h at +25 °C ambient temperature

5 cycles between -65 °C and +125 °C

2.5 x rated working voltage 5 s

45 min at full rated working voltage at -65 °C

240 h with humidity ranging from 80 % RH to 98 % RH

Leads immersed in +260 °C solder to within 1/16" of device body for 10 s

Total of 18 shocks at 100 g’s

12 h at maximum of 20 g’s between 10 Hz and 2000 Hz

1000 h at +70 °C, rated power applied 1.5 h “ON”, 0.5 h “OFF”

for full 1000 h period. Derated according to the curve.

4.5 pound pull for 30 s

10 000 M (minimum)

-

MAX. R

(TYPICAL TEST LOTS)

± 0.50 % R

± 0.50 % R

± 0.25 % R

± 0.25 % R

± 0.50 % R

± 0.25 % R

± 0.25 % R

± 0.25 % R

± 1.00 % R

± 0.25 % R

-

-

Revision: 13-Feb-15

4

Document Number: 31510

For technical questions, contact: ff2aresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Share Link: