¡ Semiconductor
MSM64P155/64P155L
PIN DESCRIPTIONS
Basic Functions
Function Pin Symbol Type
Description
Power
Supply
23
VSS
— Digital supply voltage (0 V)
100
VDD1
— Digital positive power supply (1.5 V spec.)
Bias output for LCD driver (3.0 V spec.)
99
VDD2
— Digital positive power supply (3.0 V spec.)
Bias output for LCD driver (1.5 V spec.)
98
VDD3
— Bias output for LCD driver (+4.5 V)
97
C1
— Pins for connecting a capacitor for generating LCD driving bias
96
C2
—
4
VPP
— Positive power supply for writing programming data to PROM
(+12.5 V)
Oscillation
2
3
OSC0
OSC1
I Clock oscillation pins:
Either a crystal (32.768 kHz) and a capacitor (10 to 30 pF) are
O connected to these pins or a resistor (1 MW) is.
Test
RESET
30
TST1
29
TST2
28
TST3
1
RESET
I Input pins for test:
I These pins are internally pulled down to VSS.
I When this pin is set to "H" level, the 256 Hz and 4 Hz interrupts are
enabled, and then the MSM64P155 can be used as an OTP version
of the MSM64152A, MSM64153A, and MSM64158A.
I System reset input pin :
Setting this pin to "H" level puts this device into a reset state.
Then, setting this pin to "L" level starts executing an instruction from
address 000H.
This pin is internally connected to VSS through a pull-down resistor.
5/29