MSK1933S-0(2000) Ver la hoja de datos (PDF) - M.S. Kennedy Corporation

Número de pieza

componentes Descripción

Fabricante

MSK1933S-0
(Rev.:2000)

ULTRA HIGH SPEED/VOLTAGE NEGATIVE OUTPUT VIDEO AMPLIFIER

M.S. Kennedy Corporation 

TYPICAL CONNECTION CIRCUIT

The connection circuit shown above is for the MSK 1933-0 evaluation board. The Rp and Lp are external compo-

nents and must not be located near ground planes if possible. A high quality resistor such as Bradford Electronics P/

N FP10-400 is required for optimum response times. Use an inductor with a high self-resonant frequency that can

withstand the currents required for the application.

When using the other variants of the MSK 1933, place an additional bypass capacitor on pins 12 and 13 if series

(Rp and Lp) components are not utilized. The pin should connect to -VHV with a short low impedance path.

For additional applications information, please contact the factory. Evaluation amplifiers with test boards are

readily available for MSK.

NOTES:

5

Rev. A 8/00

Share Link: