MPC7410(2010) Ver la hoja de datos (PDF) - Freescale Semiconductor
Número de pieza
componentes Descripción
Fabricante
MPC7410
(Rev.:2010)
(Rev.:2010)
Freescale Semiconductor
MPC7410 Datasheet PDF : 6 Pages
| |||
Table D. Power Consumption for MPC7410
Processor (CPU)
Frequency
400 MHz
Processor (CPU)
Frequency
450 MHz
Unit
Notes
Full-On Mode
Typical
Maximum
2.92
6.6
3.29
W
1, 3
7.43
W
1, 2,
Doze Mode
Maximum
Nap Mode
3.6
4.1
W
1, 2
Maximum
Sleep Mode
1.35
1.5
W
1, 2
Maximum
1.3
Sleep Mode—PLL and DLL Disabled
1.45
W
1, 2
Typical
Maximum
0.6
0.6
W
1, 3
1.1
1.1
W
1, 2
Notes:
1. These values apply for all valid processor bus and L2 bus ratios. The values do not include I/O Supply Power
(OVdd and L2OVdd) or PLL/DLL supply power (AVdd and L2AVdd). OVdd and L2OVdd power is system
dependent, but is typically <10% of Vdd power. Worst case power consumption for AVdd = 15 mw and L2AVdd
= 15 mW.
2. Maximum power is measured at 105 •C and Vdd = 1.5V while running an entirely cache-resident, contrived
sequence of instructions which keep the execution units, including AltiVec, maximally busy.
3. Typical power is an average value measured at 65 •C and Vdd = 1.5V in a system while running typical
benchmarks.
Part Numbers Addressed by this Specification
Table E provides the ordering information for the MPC7410TxxnnnNE series.
Table E. Part Marking Nomenclature
MPC 7410
x
xx
nnn
x
x
Product Part
Code Identifier
Process
Descriptor
Package
Processor
Frequency 1
Application
Modifier
Revision Level
MPC
7410 T: –40° to 105°C
RX = CBGA
400
N: 1.5 V ±50 mV E: 1.4; PVR = 800C 1104
450
HX = HCTE_CBGA
450
Note:
1. Processor core frequencies supported by parts addressed by this specification only. Parts addressed by other specifications
may support other maximum core frequencies.
MPC7410 RISC Microprocessor Hardware Specifications Addendum for the MPC7410TxxnnnNE Series, Rev. 2
4
Freescale Semiconductor
Share Link: