DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

EV2355DN-00A Ver la hoja de datos (PDF) - Monolithic Power Systems

Número de pieza
componentes Descripción
Fabricante
EV2355DN-00A
MPS
Monolithic Power Systems MPS
EV2355DN-00A Datasheet PDF : 10 Pages
1 2 3 4 5 6 7 8 9 10
TM
MP2355 – 3A, 23V, 380KHz STEP-DOWN CONVERTER
PACKAGE INFORMATION
SOIC8N (EXPOSED PAD)
PIN 1 IDENT.
0.229(5.820)
0.244(6.200)
NOTE 2
NOTE 4
0.150(3.810)
0.157(4.000)
0.013(0.330)
0.020(0.508)
0.050(1.270)BSC
SEE DETAIL "A"
0.0075(0.191)
0.0098(0.249)
0.011(0.280) x 45o
0.020(0.508)
0.053(1.350)
0.068(1.730)
NOTE 3
0.189(4.800)
0.197(5.000)
0o-8o
0.049(1.250)
0.060(1.524)
SEATING PLANE
0.001(0.030)
0.004(0.101)
0.016(0.410)
0.050(1.270)
DETAIL "A"
.050
.028
0.200 (5.07 mm)
0.140 (3.55mm)
0.060
Land Pattern
NOTE:
1) Control dimension is in inches. Dimension in bracket is millimeters.
2) Exposed Pad Option (N-Package) ; 2.31mm -2.79mm x 2.79mm - 3.81mm.
Recommend Solder Board Area: 2.80mm x 3.82mm = 10.7mm2 (16.6 mil2)
3) The length of the package does not include mold flash. Mold flash shall not exceed 0.006in. (0.15mm) per side.
With the mold flash included, over-all length of the package is 0.2087in. (5.3mm) max.
4) The width of the package does not include mold flash. Mold flash shall not exceed 0.10in. (0.25mm) per side.
With the mold flash included, over-all width of the package is 0.177in. (4.5mm) max.
NOTICE: The information in this document is subject to change without notice. Please contact MPS for current specifications.
Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS
products into any application. MPS will not assume any legal responsibility for any said applications.
MP2355 Rev. 1.5
www.MonolithicPower.com
10
5/1/2006
MPS Proprietary Information. Unauthorized Photocopy and Duplication Prohibited.
© 2006 MPS. All Rights Reserved.

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]