MLF1005L2R2K Ver la hoja de datos (PDF) - TDK Corporation

Número de pieza

componentes Descripción

Fabricante

MLF1005L2R2K

Multilayer/STD • magnetic shielded

TDK Corporation 

(4/9)

Inductors for Standard Circuits

Multilayer/STD • Magnetic Shielded

Conformity to RoHS Directive

MLF Series MLF1608

FEATURES

• High-reliability monolithic structure.

• Ferrite core and magnetic shielding enables the design of com-

pact circuits with high density mounting.

• Excellent solderability and high heat resistance permits either

flow or reflow soldering.

• The products contain no lead and also support lead-free

soldering.

• It is a product conforming to RoHS directive.

APPLICATIONS

Digital cellular phone, tuner, personal computers, audio, or various

electronic appliances

SPECIFICATIONS

Operating temperature range

Storage temperature range

–40 to +85°C

–40 to +85°C(After mount)

RECOMMENDED SOLDERING CONDITION

REFLOW SOLDERING

250 to 260˚C

230˚C

10s max.

Natural

cooling

180˚C

150˚C

Preheating

60 to 120s

Time(s)

Soldering

30 to 60s

PRODUCT IDENTIFICATION

MLF 1608 A 1R0 K T

(1) (2) (3) (4) (5) (6) (7)

(1) Series name

(2) Dimensions L×W

1608

1.6×0.8mm

(3) Type name

(4) Inductance

47N

R15

1R0

47nH[0.047µH]

0.15µH

1µH

(5) Tolerance

K

M

±10%

±20%

(6) Packaging style

T

Taping [reel]

(7) TDK internal code

PACKAGING STYLE AND QUANTITIES

Packaging style

Taping

Quantity

4000 pieces/reel

HANDLING AND PRECAUTIONS

• Before soldering, be sure to preheat components.

The preheating temperature should be set so that the tempera-

ture difference between the solder temperature and product

temperature does not exceed 150°C.

• After mounting components onto the printed circuit board, do not

apply stress through board bending or mishandling.

• The inductance value may change due to magnetic saturation if

the current exceeds the rated maximum.

• Do not expose the inductors to stray magnetic fields.

• Avoid static electricity discharge during handling.

• When hand soldering, apply the soldering iron to the printed cir-

cuit board only. Temperature of the iron tip should not exceed

350°C. Soldering time should not exceed 3 seconds.

• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific

bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.

• Please contact our Sales office when your application is considered the following:

The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)

• All specifications are subject to change without notice.

001-05 / 20111129 / e511_mlf_02

Share Link: