DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

IL4208(1999) Ver la hoja de datos (PDF) - Infineon Technologies

Número de pieza
componentes Descripción
Fabricante
IL4208
(Rev.:1999)
Infineon
Infineon Technologies Infineon
IL4208 Datasheet PDF : 4 Pages
1 2 3 4
600 V IL420
800 V IL4208
Triac Driver Optocoupler
FEATURES
• High Input Sensitivity IFT=2.0 mA
• 600/800 V Blocking Voltage
• 300 mA On-State Current
• High Static dv/dt 10 kV/µs
• Inverse Parallel SCRs Provide Commutating
dv/dt >10 kV/µs
• Very Low Leakage <10 µA
• Isolation Test Voltage from Double Molded
Package 5300 VACRMS
• Small 6-Pin DIP Package
• Underwriters Lab File #E52744
V
DE
VDE Approval #0884 (Optional with
Option 1, Add -X001 Suffix)
Maximum Ratings
Emitter
Reverse Voltage ...................................................6.0 V
Forward Current ................................................ 60 mA
Surge Current ...................................................... 2.5 A
Power Dissipation............................................100 mW
Derate from 25°C ......................................1.33 mW/°C
Detector
Peak Off-State Voltage
IL420 ................................................................600 V
IL4208 ..............................................................800 V
RMS On-State Current..................................... 300 mA
Single Cycle Surge Current................................. 3.0 A
Total Power Dissipation ...................................500 mW
Derate from 25°C ........................................6.6 mW/°C
Package
Isolation Test Voltage (between emitter
and detector, climate per DIN 50014,
part 2, Nov. 74, t=1.0 sec.) ..................... 5300 VRMS
Pollution Degree (DIN VDE 0109) .............................. 2
Creepage Distance ........................................ 7.0 mm
Clearance ....................................................... 7.0 mm
Comparative Tracking Index per DIN IEC
112/VDE 0303 part 1, Group IIIa per
DIN VDE 6110................................................... 175
Isolation Resistance
VIO=500 V, TA=25°C .................................... 1012
VIO=500 V, TA=100°C .................................. 1011
Storage Temperature Range .............–55°C to +150°C
Ambient Temperature Range ............–55°C to +100°C
Soldering Temperature (max. 10 sec.dip
soldering 0.5 mm from case bottom)............260°C
Dimensions in inches (mm)
321
.248 (6.30)
.256 (6.50)
4 56
.335 (8.50)
.343 (8.70)
pin one ID
LED 1
Anode
LED
Cathode 2
NC 3
.039
(1.00)
Min.
4°
typ.
.048 (1.22)
.052 (1.32)
.130 (3.30)
.138 (3.51)
.033 (0.84) typ. 3°–9°
.018 (0.46)
.020 (0.51)
.033 (0.84)typ.
.100 (2.54) typ.
6
Triac
MT2
Substrate
5 do not
connect
4
Triac
MT1
.300 (7.62)
typ.
18°
.008 (.20)
.012 (.30)
.300–.347
(7.62–8.81)
.130 (3.30)
.150 (3.81)
DESCRIPTION
The IL420/4208 consists of a GaAs IRLED optically coupled to a photo-
sensitive non-zero crossing TRIAC network. The TRIAC consists of two
inverse parallel connected monolithic SCRs. These three semiconduc-
tors are assembled in a six pin 0.3 inch dual in-line package, using high
insulation double molded, over/under leadframe construction.
High input sensitivity is achieved by using an emitter follower pho-
totransistor and a cascaded SCR predriver resulting in an LED trigger
current of less than 2.0 mA (DC).
The IL420/4208 uses two discrete SCRs resulting in a commutating
dv/dt of greater than 10 kV/µs. The use of a proprietary dv/dt clamp
results in a static dv/dt of greater than 10 kV/µs. This clamp circuit has a
MOSFET that is enhanced when high dv/dt spikes occur between MT1
and MT2 of the TRIAC. When conducting, the FET clamps the base of
the phototransistor, disabling the first stage SCR predriver.
The 600/800 V blocking voltage permits control of off-line voltages up to
240 VAC, with a safety factor of more than two, and is sufficient for as
much as 380 VAC.
The IL420/4208 isolates low-voltage logic from 120, 240, and 380 VAC
lines to control resistive, inductive, or capacitive loads including motors,
solenoids, high current thyristors or TRIAC and relays.
Applications include solid-state relays, industrial controls, office equip-
ment, and consumer appliances.
Infineon Technologies, Corp. • Optoelectronics Division • Cupertino, CA (formerly Siemens Microelectronics, Inc.)
www.infineon.com/opto • 1-800-777-4363
1
April 29, 1999

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]