Micrel, Inc.
MICRF220
Absolute Maximum Ratings(1)
Supply Voltage (VDD).................................................. +5V
ANT, SQ, SEL0, SEL1,
SHDN DC Voltage. .................... −0.3V to VDD + 0.3V
Junction Temperature ...........................................+150ºC
Lead Temperature (soldering, 10sec.)..................+300°C
Storage Temperature .............................−65ºC to +150°C
Maximum Receiver Input Power ......................... +10dBm
ESD Rating(3).................................................... 3kV HBM
Operating Ratings(2)
Supply Voltage (VDD) ............................. +3.0V to +3.6V
Ambient Temperature (TA).................. –40°C to +105°C
ANT, SQ, SEL0, SEL1,
SHDN DC Voltage ................ ....−0.3V to VDD + 0.3V
Maximum Input RF Power.................................. 0 dBm
Receive Modulation Duty Cycle ....................... 20~80%
Frequency Range .......................... 300MHz to 450MHz
Electrical Characteristics
VDD = 3.3V, VSHDN = GND = 0V, SQ = open, CCAGC = 4.7µF, CCTH = 0.1µF, unless otherwise noted. Bold values indicate
–40°C ≤ TA ≤ 105°C. “Bit rate” refers to the encoded bit rate throughout this datasheet (see Note 4).
Parameter
Condition
Min.
Typ.
Max.
Continuous Operation, fRF = 315MHz
4.3
Operating Supply Current
Continuous Operation, fRF = 433.92MHz
6.0
Shutdown Current
VSHDN = VDD
0.1
Receiver
433.92MHz, VSEL1 = VSEL0 = 0V, BER = 1%
−112.5
Conducted Receiver
Sensitivity@1kbps (Note 5)
433.92MHz, VSEL1 = VSEL0 = 0V,
BER = 0.1%
315MHz, VSEL1 = 0V, VSEL0 = 3.3V,
BER = 1%
−110
−112.5
315MHz, VSEL1 = 0V, VSEL0 = 3.3V,
BER = 0.1%
−110
Image Rejection
IF Center Frequency (fIF)
fIMAGE = fRF – 2fIF
fRF = 315MHz
fRF = 433.92MHz
25
0.85
1.18
fRF = 315MHz
235
−3dB IF Bandwidth
fRF = 433.92MHz
330
−40dBm RF input level
1.15
CAGC Voltage Range
−100dBm RF input level
1.55
Reference Oscillator
Reference Oscillator
Frequency
Reference Buffer Input
Impedance
fRF = 315 MHz
fRF = 433.92 MHz
RO1 when driven externally
9.81713
13.52313
1.6
Reference Oscillator Bias
Voltage
RO2
1.15
Reference Oscillator Input
Range
External input, AC couple to RO1
0.2
1.5
Reference Oscillator Source
Current
VRO1 = 0V
300
Units
mA
µA
dBm
dB
MHz
kHz
V
MHz
kΩ
V
VP-P
µA
August 2010
3
M9999-082610-A