MIC5310-PNYML(2006) Ver la hoja de datos (PDF) - Micrel

Número de pieza

componentes Descripción

Fabricante

MIC5310-PNYML
(Rev.:2006)

Dual, 150mA µCap LDO in 2mm x 2mm MLF®

Micrel 

Micrel, Inc.

Package

8-Pin 2x2 MLF®

θJA Recommended

Minimum Footprint

90°C/W

Thermal Resistance

Substituting PD for PD(max) and solving for the ambient

operating temperature will give the maximum

operating conditions for the regulator circuit. The

junction-to-ambient thermal resistance for the

minimum footprint is 90°C/W.

The maximum power dissipation must not be

exceeded for proper operation.

For example, when operating the MIC5310-MFYML at

MIC5310

an input voltage of 3.3V and 150mA loads at each

output with a minimum footprint layout, the maximum

ambient operating temperature TA can be determined

as follows:

0.345W = (125°C – TA)/(90°C/W)

TA=93.95°C

Therefore, a 2.8V/1.5V application with 150mA at

each output current can accept an ambient operating

temperature of 93.95°C in a 2mm x 2mm MLF®

package. For a full discussion of heat sinking and

thermal effects on voltage regulators, refer to the

“Regulator Thermals” section of Micrel’s Designing

with Low-Dropout Voltage Regulators handbook. This

information can be found on Micrel's website at:

http://www.micrel.com/_PDF/other/LDOBk_ds.pdf

April 2006

9

M9999-042406

(408) 955-1690

Share Link: