MDC-162 Ver la hoja de datos (PDF) - M/A-COM Technology Solutions, Inc.

Número de pieza

componentes Descripción

Fabricante

MDC-162

Termination-Insensitive Mixer, 1 - 7 GHz

M/A-COM Technology Solutions, Inc. 

MDC-162

Termination-Insensitive Mixer,

1 - 7 GHz

Features

C-2

• Intermodulation Ratio Insensitive to

IF Ports Mismatches

• Conversion Loss: 6 dB Typical Midband

• Impedance: 50 Ohms Nominal

• Maximum Input Power: 350 mW max. @ 25°C,

Derated 3.5 mW/°C

• Low Power: +24 dBm Max.

• MIL-STD-883 Screening Available

Description

The unique design of the termination insensitive

mixer (TIM) enables it to apply high reverse voltage

to diodes during their “off” phase, in the LO cycle.

This allows for higher power level performance with

minimum distortion. In addition the TIM has internal

loads that provide a good match and also absorb

mixer generated LO frequency terms. Combined,

these features give the mixer its insensitivity to ex-

ternal mismatches, plus superior VSWR.

Rev. V3

1

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

• India Tel: +91.80.4155721

• China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

Commitment to produce in volume is not guaranteed.

changes to the product(s) or information contained herein without notice.

Share Link: