MC74VHCU04DTR2G(2014) Ver la hoja de datos (PDF) - ON Semiconductor
Número de pieza
componentes Descripción
Fabricante
MC74VHCU04DTR2G Datasheet PDF : 6 Pages
| |||
MC74VHCU04
VCC A6 Y6 A5 Y5 A4 Y4
14 13 12 11 10 9 8
1234567
A1 Y1 A2 Y2 A3 Y3 GND
(Top View)
Figure 2. Pinout: 14−Lead Packages
MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
VCC DC Supply Voltage
–0.5 to + 7.0
V
Vin DC Input Voltage
–0.5 to + 7.0
V
Vout DC Output Voltage
–0.5 to VCC + 0.5 V
IIK Input Diode Current
−20
mA
IOK Output Diode Current
± 20
mA
Iout DC Output Current, per Pin
± 25
mA
ICC DC Supply Current, VCC and GND Pins
± 50
mA
PD Power Dissipation in Still Air,
SOIC Package†
500
mW
TSSOP Package†
450
Tstg Storage Temperature
– 65 to + 150
_C
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of
these limits are exceeded, device functionality should not be assumed, damage may occur and
reliability may be affected.
†Derating — SOIC Package: – 7 mW/_C from 65_ to 125_C
TSSOP Package: − 6.1 mW/_C from 65_ to 125_C
RECOMMENDED OPERATING CONDITIONS
Symbol
Parameter
Min
Max Unit
VCC DC Supply Voltage
2.0
5.5
V
Vin DC Input Voltage
0
5.5
V
Vout DC Output Voltage
0
VCC
V
TA Operating Temperature
−40
+ 85
_C
Functional operation above the stresses listed in the Recommended Operating Ranges is not
implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may
affect device reliability.
This device contains protection
circuitry to guard against damage
due to high static voltages or electric
fields. However, precautions must
be taken to avoid applications of any
voltage higher than maximum rated
voltages to this high−impedance cir-
cuit. For proper operation, Vin and
Vout should be constrained to the
range GND v (Vin or Vout) v VCC.
Unused inputs must always be
tied to an appropriate logic voltage
level (e.g., either GND or VCC).
Unused outputs must be left open.
http://onsemi.com
2
Share Link: 