DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

56F8345 Ver la hoja de datos (PDF) - Motorola => Freescale

Número de pieza
componentes Descripción
Fabricante
56F8345
Motorola
Motorola => Freescale Motorola
56F8345 Datasheet PDF : 148 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Freescale Semiconductor, Inc.
Part 1 Overview
1.1 56F8345 Features
1.1.1 Digital Signal Processing Core
• Efficient 16-bit 56800E family hybrid controller engine with dual Harvard architecture
• As many as 60 Million Instructions Per Second (MIPS) at 60MHz core frequency
• Single-cycle 16 × 16-bit parallel Multiplier-Accumulator (MAC)
• Four 36-bit accumulators, including extension bits
• Arithmetic and logic multi-bit shifter
• Parallel instruction set with unique DSP addressing modes
• Hardware DO and REP loops
• Three internal address buses
• Four internal data buses
• Instruction set supports both DSP and controller functions
• Controller style addressing modes and instructions for compact code
• Efficient C compiler and local variable support
• Software subroutine and interrupt stack with depth limited only by memory
• JTAG/EOnCE debug programming interface
1.1.2 Memory
• Harvard architecture permits as many as three simultaneous accesses to program and data memory
• Flash security protection feature
• On-chip memory, including a low-cost, high-volume Flash solution
— 128KB of Program Flash
— 4KB of Program RAM
— 8KB of Data Flash
— 8KB of Data RAM
— 8KB of Boot Flash
• EEPROM emulation capability
1.1.3 Peripheral Circuits for 56F8345
• Two Pulse Width Modulator modules, each with six PWM outputs, three Current Sense inputs, and
four Fault inputs; fault-tolerant design with dead time insertion; supports both center-aligned and
edge-aligned modes
• Four 12-bit, Analog-to-Digital Converters (ADCs), which support four simultaneous conversions
with quad, 4-pin multiplexed inputs; ADC and PWM modules can be synchronized through Timer
C, channels 2 and 3
• Two four-input Quadrature Decoders or two additional Quad Timers
• Temperature Sensor can be connected, on the board, to any of the ADC inputs to monitor the
on-chip temperature
• Four dedicated general-purpose Quad Timers totaling six dedicated pins: Timer C with two pins and
Timer D with four pins
• Optional On-Chip Regulator
4
56F8345 Technical Data
For More Information On This Product,
Go to: www.freescale.com
Preliminary

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]