MC100EP90DT Ver la hoja de datos (PDF) - ON Semiconductor

Número de pieza

componentes Descripción

Fabricante

MC100EP90DT

−3.3V / −5V Triple ECL Input to LVPECL/PECL Output Translator

ON Semiconductor 

MC10EP90, MC100EP90

−3.3V / −5V Triple ECL Input

to LVPECL/PECL Output

Translator

Description

The MC10/100EP90 is a TRIPLE ECL TO LVPECL/PECL

translator. The device receives differential LVECL or ECL signals and

translates them to differential LVPECL or PECL output signals.

A VBB output is provided for interfacing with Single−Ended LVECL

or ECL signals at the input. If a Single−Ended input is to be used the

VBB output should be connected to the D input. The active signal would

then drive the D input. When used the VBB output should be bypassed

to ground by a 0.01 mF capacitor. The VBB output is designed to act as

the switching reference for the EP90 under Single−Ended input

switching conditions, as a result this pin can only source/sink up to

0.5 mA of current.

To accomplish the level translation the EP90 requires three power

rails. The VCC supply should be connected to the positive supply, and

the VEE connected to the negative supply.

The 100 Series contains temperature compensation.

Features

• 260 ps Typical Propagation Delay

• Maximum Frequency > 3 GHz Typical

• Voltage Supplies VCC = 3.0 V to 5.5 V, VEE = −3.0 V to −5.5 V,

GND = 0 V

• Open Input Default State

• Safety Clamp on Inputs

• Fully Differential Design

• Q Output Will Default LOW with Inputs Open or at VEE

• VBB Output

• These are Pb−Free Devices*

http://onsemi.com

TSSOP−20

DT SUFFIX

CASE 948E

MARKING DIAGRAM*

20

xxxx

EP90

ALYWG

G

1

xxxx = MC10 or 100

A

= Assembly Location

L

= Wafer Lot

Y

= Year

W

= Work Week

G

= Pb−Free Package

(Note: Microdot may be in either location)

*For additional marking information, refer to

Application Note AND8002/D.

ORDERING INFORMATION

See detailed ordering and shipping information in the package

dimensions section on page 7 of this data sheet.

*For additional information on our Pb−Free strategy and soldering details, please

download the ON Semiconductor Soldering and Mounting Techniques

Reference Manual, SOLDERRM/D.

© Semiconductor Components Industries, LLC, 2006

1

November, 2006 − Rev. 6

Publication Order Number:

MC10EP90/D

Share Link: