MC100EP142FAG(2015) Ver la hoja de datos (PDF) - ON Semiconductor
Número de pieza
componentes Descripción
Fabricante
MC100EP142FAG Datasheet PDF : 14 Pages
| |||
MC10EP142, MC100EP142
Table 7. 10EP DC CHARACTERISTICS, NECL VCC = 0 V, VEE = −5.5 V to −3.0 V (Note 11)
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
VIH
VIL
VIHCMR
IIH
IIL
Input HIGH Voltage (Single−Ended) −1210
Input LOW Voltage (Single−Ended) −1935
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 14)
VEE+2.0
Input HIGH Current (@ VIH)
Input LOW Current (@ VIL)
CLK0, CLK1, D, S−IN
CLK0, CLK1, S−IN
0.5
−150
−885 −1145
−1610 −1870
0.0
VEE+2.0
150
0.5
−150
−820 −1085
−1545 −1810
0.0
VEE+2.0
150
0.5
−150
−760 mV
−1485 mV
0.0
V
150 mA
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm.
11. Input and output parameters vary 1:1 with VCC.
12. Required 500 lfpm air flow when using −5 V power supply. For (VCC − VEE) >3.3 V, 5 W to 10 W in line with VEE required for maximum thermal
protection at elevated temperatures. Recommend VCC−VEE operation at 3.3 V.
13. All loading with 50 W to VCC − 2.0 V.
14. VIHCMR min varies 1:1 with VEE, VIHCMR max varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the differential
input signal.
Table 8. 100EP DC CHARACTERISTICS, PECL VCC = 3.3 V, VEE = 0 V (Note 15)
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
IEE
VOH
VOL
VIH
VIL
VIHCMR
Negative Power Supply Current
Output HIGH Voltage (Note 16)
Output LOW Voltage (Note 16)
Input HIGH Voltage (Single−Ended)
Input LOW Voltage (Single−Ended)
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 17)
105 125 145 105 130 150 105 130 150 mA
2155 2280 2405 2155 2280 2405 2155 2280 2405 mV
1305 1480 1605 1305 1480 1605 1305 1480 1605 mV
2075
2420 2075
2420 2075
2420 mV
1305
1675 1305
1675 1305
1675 mV
2.0
3.3 2.0
3.3 2.0
3.3
V
IIH
Input HIGH Current (@ VIH)
IIL
Input LOW Current (@ VIL)
CLK0, CLK1, D, S−IN 0.5
CLK0, CLK1, S−IN −150
150
0.5
−150
150
0.5
−150
150 mA
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm.
15. Input and output parameters vary 1:1 with VCC. VEE can vary +0.3 V to −2.2 V.
16. All loading with 50 W to VCC − 2.0 V.
17. VIHCMR min varies 1:1 with VEE, VIHCMR max varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the differential
input signal.
Table 9. 100EP DC CHARACTERISTICS, PECL VCC = 5.0 V, VEE = 0 V (Note 18)
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
IEE
Negative Power Supply Current
(Note 19)
105 125 145 105 130 150 105 130 150 mA
VOH
Output HIGH Voltage (Note 20)
3855 3980 4105 3855 3980 4105 3855 3980 4105 mV
VOL
Output LOW Voltage (Note 20)
3005 3180 3305 3005 3180 3305 3005 3180 3305 mV
VIH
Input HIGH Voltage (Single−Ended)
3775
4120 3775
4120 3775
4120 mV
VIL
Input LOW Voltage (Single−Ended)
3005
3375 3005
3375 3005
3375 mV
www.onsemi.com
8
Share Link: 