MC100EP142FAG(2015) Ver la hoja de datos (PDF) - ON Semiconductor
Número de pieza
componentes Descripción
Fabricante
MC100EP142FAG Datasheet PDF : 14 Pages
| |||
MC10EP142, MC100EP142
Table 5. 10EP DC CHARACTERISTICS, PECL VCC = 3.3 V, VEE = 0 V (Note 4)
−40°C
25°C
85°C
Symbol
IEE
VOH
VOL
VIH
VIL
VIHCMR
Characteristic
Negative Power Supply Current
Output HIGH Voltage (Note 5)
Output LOW Voltage (Note 5)
Input HIGH Voltage (Single−Ended)
Input LOW Voltage (Single−Ended)
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 6)
Min Typ Max Min Typ Max Min Typ Max Unit
105 125 145 105 125 145 105 125 145 mA
2165 2290 2415 2230 2355 2480 2290 2415 2540 mV
1365 1490 1615 1430 1555 1680 1490 1615 1740 mV
2090
2415 2155
2480 2215
2540 mV
1365
1690 1460
1755 1490
1815 mV
2.0
3.3 2.0
3.3 2.0
3.3
V
IIH
Input HIGH Current (@ VIH)
IIL
Input LOW Current (@ VIL)
CLK0, CLK1, D, S−IN 0.5
CLK0, CLK1, S−IN −150
150
0.5
−150
150
0.5
−150
150 mA
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm.
4. Input and output parameters vary 1:1 with VCC. VEE can vary +0.3 V to −2.2 V.
5. All loading with 50 W to VCC − 2.0 V.
6. VIHCMR min varies 1:1 with VEE, VIHCMR max varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the differential
input signal.
Table 6. 10EP DC CHARACTERISTICS, PECL VCC = 5.0 V, VEE = 0 V (Note 7)
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
IEE
Negative Power Supply Current (Note 8) 105 125 145 105 125 145 105 125 145 mA
VOH
VOL
VIH
VIL
VIHCMR
Output HIGH Voltage (Note 9)
Output LOW Voltage (Note 9)
Input HIGH Voltage (Single−Ended)
Input LOW Voltage (Single−Ended)
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 10)
3865 3990 4115 3930 4055 4180 3990 4115 4240 mV
3065 3190 3315 3130 3255 3380 3190 3315 3440 mV
3790
4115 3855
4180 3915
4240 mV
3065
3390 3130
3455 3190
3515 mV
2.0
5.0 2.0
5.0 2.0
5.0
V
IIH
Input HIGH Current (@ VIH)
IIL
Input LOW Current (@ VIL)
CLK0, CLK1, D, S−IN 0.5
CLK0, CLK1, S−IN −150
150
0.5
−150
150
0.5
−150
150 mA
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm.
7. Input and output parameters vary 1:1 with VCC. VEE can vary +2.0 V to −0.5 V.
8. Required 500 lfpm air flow when using +5 V power supply. For (VCC − VEE) >3.3 V, 5 W to 10 W in line with VEE required for maximum thermal
protection at elevated temperatures. Recommend VCC − VEE operation at 3.3 V.
9. All loading with 50 W to VCC − 2.0 V.
10. VIHCMR min varies 1:1 with VEE, VIHCMR max varies 1:1 with VCC. The VIHCMR range is referenced to the most positive side of the differential
input signal.
Table 7. 10EP DC CHARACTERISTICS, NECL VCC = 0 V, VEE = −5.5 V to −3.0 V (Note 11)
−40°C
25°C
85°C
Symbol
Characteristic
Min Typ Max Min Typ Max Min Typ Max Unit
IEE
Negative Power Supply Current
105 125 145 105 125 145 105 125 145 mA
(Note 12)
VOH
Output HIGH Voltage (Note 13)
−1135 −1010 −885 −1070 −945 −820 −1010 −885 −760 mV
VOL
Output LOW Voltage (Note 13)
−1935 −1810 −1685 −1870 −1745 −1620 −1810 −1685 −1560 mV
www.onsemi.com
7
Share Link: 