MB95110M Ver la hoja de datos (PDF) - Fujitsu

Número de pieza

componentes Descripción

Fabricante

MB95110M

8-bit Microcontrollers

Fujitsu 

MB95110M Series

■ MAIN CHANGES IN THIS EDITION

Page

Section

Change Results

⎯

⎯

No third edition in the DS07-12611-4E.

2 ■ FEATURES

Added the description Dual operation Flash memory.

4 ■ PRODUCT LINEUP

Changed the contents of Option.

6 ■ PACKAGES AND CORRESPONDING Changed FPT-52P-M01 of MB95117M as follows;

PRODUCTS

* (Under development) → (Available).

7 ■ DIFFERENCES AMONG PRODUCTS Deleted as follows;

AND NOTES ON SELECTING

“The input type of RST and MOD pins is CMOS inputs on

PRODUCTS

the Flash memory product. The RST and MOD pins are

• Difference between RST and MOD Pins hysteresis inputs on the MASK ROM product.”

11 ■ I/O CIRCUIT TYPE

Changed as follows in the remarks of “Type B”.

Hysteresis input only for MASK ROM product →

Hysteresis input

24 ■ I/O MAP

Changed as follows for R/W of Reset source register

R → R/W

37 ■ ELECTRICAL CHARACTERISTICS

4. AC Characteristics

(1) Clock Timing

Added “Main PLL multiplied by 4” in the Clock frequency

39 (2) Source Clock/Machine Clock

• Changed in the remarks of source clock cycle time

(when using main clock)

Min : FCH = 16.25 MHz, PLL multiplied by 1

→ Min : FCH = 8.125 MHz, PLL multiplied by 2

• Changed the footnote of *1;

PLL multiplication of main clock (select from 1, 2, 2.5 mul-

tiplication) → PLL multiplication of main clock (select

from 1, 2, 2.5,4 multiplication)

• Added “ × 4” in the Main PLL of “• Outline of clock

generation block”

41

62 to 67 ■ EXAMPLE CHARACTERISTICS

Changed the figure of • Main PLL operation frequency

Added the ■ EXAMPLE CHARACTERISTICS

The vertical lines marked in the left side of the page show the changes.

72

Share Link: