MB91351A Ver la hoja de datos (PDF) - Fujitsu

Número de pieza

componentes Descripción

Fabricante

MB91351A

32-bit Microcontroller

Fujitsu 

MB91350A Series

Pin no.

LQFP*1 LQFP*2

87

73

88

74

89

75

Pin name

SI6

AIN0

TRG0

PM0

SO6

BIN0

TRG1

PM1

SCK6

ZIN0

TRG2

PM2

I/O

circuit

type*3

Function

Data input for serial I/O6.

Since this input is always used when serial I/O6 input is

operating, output using the port must be stopped beforehand

unless this operation is the intended operation.

Input for the up/down counter.

Since this input is always used when input is enabled, output

using the port must be stopped beforehand unless this operation

D is the intended operation.

External trigger input for PPG timer 0.

Since this input is always used when input is enabled, output

using the port must be stopped beforehand unless this operation

is the intended operation.

General-purpose I/O port.

This pin can be used as a port when serial I/O, up/down counter,

and PPG timer output are not used.

Data output from serial I/O6.

This function is valid when data output from serial I/O6 is

enabled.

Input for the up/down counter.

Since this input is always used when input is enabled, output

using the port must be stopped beforehand unless this operation

is the intended operation.

D

External trigger input for PPG timer 1.

Since this input is always used when input is enabled, output

using the port must be stopped beforehand unless this operation

is the intended operation.

General-purpose I/O port.

This pin can be used as a port when serial I/O, up/down counter,

and PPG timer output are not used.

Clock I/O for serial I/O 6.

This function is valid when clock output from serial I/O6 is

enabled or when an external shift clock input is used.

Input for the up/down counter.

Since this input is always used when input is enabled, output

using the port must be stopped beforehand unless this operation

is the intended operation.

D

External trigger input for PPG timer 2.

Since this input is always used when input is enabled, output

using the port must be stopped beforehand unless this operation

is the intended operation.

General-purpose I/O port.

This pin can be used as a port when serial I/O, up/down counter,

and PPG timer output are not used.

(Continued)

9

Share Link: