MB91F158 Ver la hoja de datos (PDF) - Fujitsu

Número de pieza

componentes Descripción

Fabricante

MB91F158

32-bit Proprietary Microcontrollers

Fujitsu 

MB91F158

Pin No.

86

87

88

89

90

91

92

93

94

Pin name

PF0/IN0

PF1/IN1

PF2/IN2

PF3/IN3

PF4

PG0/PPG0

PG1/PPG1

PG2/PPG2

PG3/PPG3

97 PI2/SCK2/TO2

98

PI1/SOT2

99

PI0/SIN2

100 PH2/SCK0/TO0

101

PH1/SOT0

102

PH0/SIN0

103

SSEL

104

DA2

105

DA1

106

DA0

107

DAVS

108

DAVC

109

AVCC

Circuit

type

Function

Input capture input

F This function is enabled when the input capture operation is input.

These pins are available as ports when input capture input is not in use.

F General purpose I/O port

PPG timer output

F This function is enabled when PPG timer output is allowed.

These pins are available as ports when PPG timer output is not allowed.

UART2 clock I/O, Reload timer 2 output

When UART2 clock output is not allowed, reload timer 2 can be output by

P allowing it.

This pin is available as a port when neither UART2 clock output nor reload

timer output is allowed.

UART2 data output

P This function is enabled when UART2 data output is allowed.

This pin is available as a port when UART2 clock output is not allowed.

UART2 data input

Since this input is used more or less continuously while UART2 is

P engaged in input operations, output by the port needs to be stopped

except when it is performed deliberately.

This pin is available as a port when UART2 data input is not in use.

UART0 clock I/O, Reload timer 0 output

When UART0 clock output is not allowed, reload timer 0 can be output by

P allowing it.

This pin is available as a port when neither UART0 clock output nor reload

timer output is allowed.

UART0 data output

P This function is enabled when UART0 data output is allowed.

This pin is available as a port when UART0 clock output is not allowed.

UART0 data input

Since this input is used more or less continuously while UART0 is

P engaged in input operations, output by the port needs to be stopped

except when it is performed deliberately.

This pin is available as a port when UART0 data input is not in use.

G

Sector mode switching pin of FLASH

This pin should be connected to VCC or VSS.



D/A converter output

This function is enabled when D/A converter output is allowed.

 Power supply pin for D/A converter

 Power supply pin for D/A converter

 VCC power supply pin for A/D converter

(Continued)

7

Share Link: