MB90520B(2008) Ver la hoja de datos (PDF) - Fujitsu
Número de pieza
componentes Descripción
Fabricante
MB90520B Datasheet PDF : 104 Pages
| |||
MB90520B Series
Pin No.
LQFP-120*1
QFP-120*2
9, 10
11
12
13
14
15
Pin Name
Circuit
Type
Function
P40, P41
PPG10,
PPG11
P42
SIN0
P43
SOT0
P44
SCK0
P45
SIN1
P46
SOT1
General-purpose I/O ports
Only available when waveform outputs from PPG10 and PPG11 are dis-
abled.
The settings in the pull-up resistor setup register (RDR4) are enabled
D when ports are set as inputs. The RDR4 settings are ignored when ports
are set as outputs.
Output pins for 8/16-bit PPG timer 1
Only available when waveform output is enabled for PPG10 and PPG11.
General-purpose I/O port
The settings in the pull-up resistor setup register (RDR4) are enabled
when ports are set as inputs. The RDR4 settings are ignored when ports
are set as outputs.
D
UART (SCI) serial data input pin
Input operates continuously when the UART is performing input.
Accordingly, output to the pin from other functions that share this pin must
be suspended unless performed intentionally.
General-purpose I/O port
The settings in the pull-up resistor setup register (RDR4) are enabled
when ports are set as inputs. The RDR4 settings are ignored when ports
D are set as outputs.
UART (SCI) serial data output pin
Only available when serial data output is enabled for the UART (SCI) .
General-purpose I/O port
The settings in the pull-up resistor setup register (RDR4) are enabled
when ports are set as inputs. The RDR4 settings are ignored when ports
D are set as outputs.
UART (SCI) serial clock input/output pin
Only available when serial clock output is enabled for the UART (SCI) .
General-purpose I/O port
The settings in the pull-up resistor setup register (RDR4) are enabled
when ports set as inputs. The RDR4 settings are ignored when ports set
are as outputs.
D
Data input pin for extended I/O serial interface 1
Input operates continuously when the performing serial input. Accordingly,
output to the pin from other functions that share this pin must be
suspended unless performed intentionally.
General-purpose I/O port
The settings in the pull-up resistor setup register (RDR4) are enabled
when ports set as inputs. The RDR4 settings are ignored when ports are
D set as outputs.
Data output pin for extended I/O serial interface 1
Only available when serial data output is enabled for SOT1.
*1 : FPT-120P-M24
*2 : FPT-120P-M13
(Continued)
10
DS07-13707-5E
Share Link: 