MAC4DCM, MAC4DCN
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance, − Junction−to−Case
− Junction−to−Ambient
− Junction−to−Ambient (Note 2)
Maximum Lead Temperature for Soldering Purposes (Note 3)
Symbol
RqJC
RqJA
RqJA
TL
Max
3.5
88
80
260
Unit
°C/W
°C
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted; Electricals apply in both directions)
Characteristic
Symbol Min Typ Max Unit
OFF CHARACTERISTICS
Peak Repetitive Blocking Current
(VD = Rated VDRM, VRRM; Gate Open)
TJ = 25°C
TJ = 125°C
ON CHARACTERISTICS
Peak On−State Voltage (Note 4) (ITM = ± 6.0 A)
Gate Trigger Current (Continuous dc) (VD = 12 V, RL = 100 W)
MT2(+), G(+)
MT2(+), G(−)
MT2(−), G(−)
IDRM,
IRRM
mA
−
− 0.01
−
−
2.0
VTM
−
1.3 1.6
V
IGT
mA
8.0
12
35
8.0
18
35
8.0
22
35
Gate Trigger Voltage (Continuous dc) (VD = 12 V, RL = 100 W)
MT2(+), G(+)
MT2(+), G(−)
MT2(−), G(−)
VGT
V
0.5 0.8 1.3
0.5 0.8 1.3
0.5 0.8 1.3
Gate Non−Trigger Voltage (Continuous dc) (VD = 12 V, RL = 100 W)
MT2(+), G(+); MT2(+), G(−); MT2(−), G(−)
TJ = 125°C
Holding Current (VD = 12 V, Gate Open, Initiating Current = ± 200 mA)
Latching Current (VD = 12 V, IG = 35 mA)
MT2(+), G(+)
MT2(+), G(−)
MT2(−), G(−)
VGD
0.2 0.4
−
V
IH
6.0 22
35
mA
IL
mA
−
30
60
−
50
80
−
20
60
DYNAMIC CHARACTERISTICS
Rate of Change of Commutating Current
(VD = 400 V, ITM = 4.0 A, Commutating dv/dt = 18 V/msec,
Gate Open, TJ = 125°C, f = 250 Hz, CL = 5.0 mF, LL = 20 mH, No Snubber)
(See Figure 16)
di/dt(c)
6.0 8.4
−
A/ms
Critical Rate of Rise of Off−State Voltage
(VD = 0.67 X Rated VDRM, Exponential Waveform, Gate Open, TJ = 125°C)
dv/dt
2. These ratings are applicable when surface mounted on the minimum pad sizes recommended.
3. 1/8″ from case for 10 seconds.
4. Pulse Test: Pulse Width ≤ 2.0 msec, Duty Cycle ≤ 2%.
500 1700 −
V/ms
ORDERING INFORMATION
Device
Package Type
Package
Shipping†
MAC4DCM−001
DPAK−3
369D
75 Units / Rail
MAC4DCM−1G
DPAK−3
(Pb−Free)
369D
75 Units / Rail
MAC4DCMT4
DPAK
369C
2500 / Tape & Reel
MAC4DCMT4G
DPAK
(Pb−Free)
369C
2500 / Tape & Reel
MAC4DCN−001
DPAK−3
369D
75 Units / Rail
MAC4DCN−1G
DPAK−3
(Pb−Free)
369D
75 Units / Rail
MAC4DCNT4
DPAK
369C
2500 / Tape & Reel
MAC4DCNT4G
DPAK
(Pb−Free)
369C
2500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
2