MAAP-000074-SMB001 Ver la hoja de datos (PDF) - Tyco Electronics
Número de pieza
componentes Descripción
Fabricante
MAAP-000074-SMB001 Datasheet PDF : 8 Pages
| |||
Amplifier, Power, 8W
2.0-8.0 GHz
Features
♦ 8 Watt Saturated Output Power Level
♦ Eutectically mounted to Heat Spreader
♦ Next level integration is a Silver Epoxy-Based Process
♦ Variable Drain Voltage (6-10V) Operation
♦ MSAG™ Process
Description
The MAAP-000074-PED000 is a 2-stage 8W power amplifier with on-chip bias net-
works, eutettically mounted on a 10-mil thick Copper Molybdenum (CuMo) pedes-
tal. This product is fully matched to 50 ohms on both the input and output. It can be
used as a power amplifier stage or as a driver stage in high power applications.
Fabricated using M/A-COM’s repeatable, high performance and highly reliable
GaAs Multifunction Self-Aligned Gate (MSAG™)Process, each device is 100% RF
tested at the die-on-pedestal assembly level to ensure performance compliance.
M/A-COM’s MSAG™ process features robust silicon-like manufacturing processes,
planar processing of ion implanted transistors, multiple implant capability enabling
power, low-noise, switch and digital FETs on a single chip, and polyimide scratch
protection for ease of use with automated manufacturing processes. The use of
refractory metals and the absence of platinum in the gate metal formulation pre-
vents hydrogen poisoning when employed in hermetic packaging.
MAAP-000074-PED000
Rev —
Preliminary Datasheet
Primary Applications
♦ SatCom
♦ Radio Communications
♦ Radar
♦ Electronic Warfare
Also Available in:
Description
Die
Ceramic Package
Sample Board (Die) Sample Board (Pkg) Mechanical Sample (Die)
Part Number MAAPGM0074-DIE MAAP-000074-PKG001 MAAP-000074-SMB004 MAAP-000074-SMB001 MAAP-000074-MCH000
Electrical Characteristics: TB = 30°C1, Z0 = 50 Ω, VDD = 10V, IDQ = 2.1A2, Pin = 28 dBm, RG=40 Ω
Parameter
Symbol
Typical
Units
Bandwidth
Output Power
1-dB Compression Point
Small Signal Gain
Input VSWR
Output VSWR
Gate Current
Drain Current
2nd Harmonic, 2-4 GHz
2nd Harmonic, 6-8 GHz
f
POUT
P1dB
G
VSWR
VSWR
IGG
IDD
2f
2f
2.0-8.0
39
38
14
1.7:1
2.2:1
3.5
3.5
16.5
72
GHz
dBm
dBm
dB
mA
A
dBc
dBc
1. TB = MMIC Base Temperature
2. Adjust VGG between –2.6 and –1.5V to achieve specified IDQ.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Share Link: 