MITSUBISHI MICROCOMPUTERS
M37902FCCHP, M37902FGCHP, M37902FJCHP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
FUNCTIONS (Microcomputer mode)
Parameter
Number of basic machine instructions
Instruction execution time
External clock input frequency f(XIN)
System clock frequency f(fsys)
Memory size
Flash memory (User ROM area)
RAM
Flash memory (Boot ROM area)
Programmable input/output
P0–P2, P4–P8, P10, P11
ports
P3
Multi-functional timers
TA0–TA4
TB0–TB2
Serial I/O
UART0 and UART1
A-D converter
D-A converter
Watchdog timer
Chip-select wait control
Real-time output
Interrupts
Maskable interrups
Clock generating circuit
Non-maskable interrups
PLL frequency multiplier
Power supply voltage
Power dissipation
Ports’ input/output
Input/Output withstand voltage
characteristics
Output current
Memory expansion
Operating ambient temperature range
Device structure
Package
Functions
203
38 ns (the fastest instruction at f(fsys) = 26 MHz)
26 MHz (Max.)
26 MHz (Max.)
(Note)
(Note)
16 Kbytes
8-bit ✕ 10
4-bit ✕ 1
16-bit ✕ 5
16-bit ✕ 3
(UART or Clock synchronous serial I/O) ✕ 2
10-bit successive approximation method ✕ 1 (8 channels)
8-bit ✕ 3
12-bit ✕ 1
Chip select area ✕ 4 (CS0–CS3). A bus cycle type and bus width
can be set for each chip select area.
4 bits ✕ 2 channels; or 6 bits ✕ 1 channel + 2 bits ✕ 1 channel
5 external types, 13 internal types. Each interrupt can be set to a
priority level within the range of 0–7 by software.
1 external type, 3 internal types.
Built-in (externally connected to a ceramic resonator or quartz
crystal resonator).
The following multiplication methods are available: double, triple,
and quadruple.
5 V±0.5 V
150 mW (at f(fsys) = 26 MHz, Typ., PLL frequency multiplier
stopped)
5V
5 mA
Up to 16 Mbytes. Note that bank FF16 is a reserved area.
–20 to 85 °C
CMOS high-performance silicon gate process
100-pin plastic molded QFP
Note:
Flash memory
(User ROM area)
RAM
M37902FCCHP
M37902FGCHP
M37902FJCHP
M37902FCCHP
M37902FGCHP
M37902FJCHP
120 Kbytes
248 Kbytes
498 Kbytes
4096 bytes
6144 bytes
12288 bytes
4