VN2450N3 Ver la hoja de datos (PDF) - Supertex Inc
Número de pieza
componentes Descripción
Fabricante
VN2450N3 Datasheet PDF : 4 Pages
| |||
VN2450
N-Channel Enhancement-Mode
Vertical DMOS FETs
Ordering Information
BVDSS /
BVDGS
500V
RDS(ON)
(max)
13Ω
ID(ON)
(min)
0.5A
TO-92
VN2450N3
* Same as SOT-89 Product Supplied on 2000 piece carrier tape reels.
** Die in wafer form.
Features
❏ Free from secondary breakdown
❏ Low input and output leakage
❏ Low CISS and fast switching speeds
❏ High input impedance and high gain
Applications
❏ Motor controls
❏ Converters
❏ Amplifiers
❏ Switches
❏ Power supply circuits
❏ Drivers (relays, hammers, solenoids, lamps,
memories, displays, bipolar transistors, etc.)
Order Number / Package
TO-243AA*
VN2450N8
Die**
VN2450NW
Product marking for TO-243AA:
VN4E❋
Where ❋ = 2-week alpha date code
Advanced DMOS Technology
These low threshold enhancement-mode (normally-off) transis-
tors utilize a vertical DMOS structure and Supertex’s well-proven
silicon-gate manufacturing process. This combination produces
devices with the power handling capabilities of bipolar transistors
and with the high input impedance and positive temperature
coefficient inherent in MOS devices. Characteristic of all MOS
structures, these devices are free from thermal runaway and
thermally-induced secondary breakdown.
Supertex’s vertical DMOS FETs are ideally suited to a wide range
of switching and amplifying applications where high breakdown
voltage, high input impedance, low input capacitance, and fast
switching speeds are desired.
Package Options
Absolute Maximum Ratings
Drain-to-Source Voltage
Drain-to-Gate Voltage
Gate-to-Source Voltage
Operating and Storage Temperature
Soldering Temperature*
* Distance of 1.6 mm from case for 10 seconds.
BVDSS
BVDGS
± 20V
-55°C to +150°C
300°C
D
G
D
S
TO-243AA
(SOT-89)
SGD
TO-92
Note: See Package Outline section for dimensions.
11/12/01
Supertex Inc. does not recommend the use of its products in life support applications and will not knowingly sell its products for use in such applications unless it receives an adequate "products liability
indemnification insurance agreement." Supertex does not assume responsibility for use of devices described and limits its liability to the replacement of devices determined to be defective due to
workmanship. No responsibility is assumed for possible omissions or inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications, refer to the
Supertex website: http://www.supertex.com. For complete liability information on all Supertex prod1ucts, refer to the most current databook or to the Legal/Disclaimer page on the Supertex website.
Share Link: 